Hi everyone,

I need a replacement foredeck hatch for my 1963 28 foot Owens. It's
the type that is metal, round with glass in it and has 3 arms
protecting the glass. I dropped the anchor on it, bent 2 arms and
fractured the glass which now leaks. The boat is a full restoration so
I would prefer an exact replacement if possible. If you know of one,
or of a boat being parted out or of any other soure, please let me
know. I think the hatches were all the same on these boats over a
period of 6 years, so my chances of finding one aren't too remote.
Just remove INVALID from the email address to reply. I live in
southern Florida so if you are in the area I can drive over to pick it
up. Thanks,

Ron Wilson

"Ron Wilson" wrote in message
...
Hi everyone,

I need a replacement foredeck hatch for my 1963 28 foot Owens. It's
the type that is metal, round with glass in it and has 3 arms
protecting the glass. I dropped the anchor on it, bent 2 arms and
fractured the glass which now leaks. The boat is a full restoration so
I would prefer an exact replacement if possible. If you know of one,
or of a boat being parted out or of any other soure, please let me
know. I think the hatches were all the same on these boats over a
period of 6 years, so my chances of finding one aren't too remote.
Just remove INVALID from the email address to reply. I live in
southern Florida so if you are in the area I can drive over to pick it
up. Thanks,

Ron Wilson
Might try Sailorman in Ft Lauderdale or Dons Salvage in Clearwater.

On Sat, 14 Feb 2009 11:34:38 -0500, "mmc" wrote:


"Ron Wilson" wrote in message
.. .
Hi everyone,

I need a replacement foredeck hatch for my 1963 28 foot Owens. It's
the type that is metal, round with glass in it and has 3 arms
protecting the glass. I dropped the anchor on it, bent 2 arms and
fractured the glass which now leaks. The boat is a full restoration so
I would prefer an exact replacement if possible. If you know of one,
or of a boat being parted out or of any other soure, please let me
know. I think the hatches were all the same on these boats over a
period of 6 years, so my chances of finding one aren't too remote.
Just remove INVALID from the email address to reply. I live in
southern Florida so if you are in the area I can drive over to pick it
up. Thanks,

Ron Wilson
Might try Sailorman in Ft Lauderdale or Dons Salvage in Clearwater.


Thank you, I've tried Sailorman but haven't heard of Don's salvage.

Ron Wilson

"Ron Wilson" wrote in message
...
On Sat, 14 Feb 2009 11:34:38 -0500, "mmc" wrote:


"Ron Wilson" wrote in message
. ..
Hi everyone,

I need a replacement foredeck hatch for my 1963 28 foot Owens. It's
the type that is metal, round with glass in it and has 3 arms
protecting the glass. I dropped the anchor on it, bent 2 arms and
fractured the glass which now leaks. The boat is a full restoration so
I would prefer an exact replacement if possible. If you know of one,
or of a boat being parted out or of any other soure, please let me
know. I think the hatches were all the same on these boats over a
period of 6 years, so my chances of finding one aren't too remote.
Just remove INVALID from the email address to reply. I live in
southern Florida so if you are in the area I can drive over to pick it
up. Thanks,

Ron Wilson
Might try Sailorman in Ft Lauderdale or Dons Salvage in Clearwater.


Thank you, I've tried Sailorman but haven't heard of Don's salvage.

Ron Wilson

Don's has a lot of good stuff. They get new stock from discontinued models
as well as salvage. The couple times I've been there I ended up bringing
home a trunk full of stuff I didn't know I needed....
Good luck.

"mmc" wrote in message
g.com...

"Ron Wilson" wrote in message
...
On Sat, 14 Feb 2009 11:34:38 -0500, "mmc" wrote:


"Ron Wilson" wrote in message
...
Hi everyone,

I need a replacement foredeck hatch for my 1963 28 foot Owens. It's
the type that is metal, round with glass in it and has 3 arms
protecting the glass. I dropped the anchor on it, bent 2 arms and
fractured the glass which now leaks. The boat is a full restoration so
I would prefer an exact replacement if possible. If you know of one,
or of a boat being parted out or of any other soure, please let me
know. I think the hatches were all the same on these boats over a
period of 6 years, so my chances of finding one aren't too remote.
Just remove INVALID from the email address to reply. I live in
southern Florida so if you are in the area I can drive over to pick it
up. Thanks,

Ron Wilson
Might try Sailorman in Ft Lauderdale or Dons Salvage in Clearwater.


Thank you, I've tried Sailorman but haven't heard of Don's salvage.

Ron Wilson

Don's has a lot of good stuff. They get new stock from discontinued models
as well as salvage. The couple times I've been there I ended up bringing
home a trunk full of stuff I didn't know I needed....
Good luck.


People like Ron are usually way to cheap to actually buy things. He'd rather
go around and mooch things for free. His boat looks like a wreck. That
particular model was ugly when it was brand new. A forty-five year old wood
boat??? What good is that?


Wilbur Hubbard

On Sat, 14 Feb 2009 18:31:38 -0500, "Wilbur Hubbard"
wrote:


"mmc" wrote in message
ng.com...

"Ron Wilson" wrote in message
...
On Sat, 14 Feb 2009 11:34:38 -0500, "mmc" wrote:


"Ron Wilson" wrote in message
m...
Hi everyone,

I need a replacement foredeck hatch for my 1963 28 foot Owens. It's
the type that is metal, round with glass in it and has 3 arms
protecting the glass. I dropped the anchor on it, bent 2 arms and
fractured the glass which now leaks. The boat is a full restoration so
I would prefer an exact replacement if possible. If you know of one,
or of a boat being parted out or of any other soure, please let me
know. I think the hatches were all the same on these boats over a
period of 6 years, so my chances of finding one aren't too remote.
Just remove INVALID from the email address to reply. I live in
southern Florida so if you are in the area I can drive over to pick it
up. Thanks,

Ron Wilson
Might try Sailorman in Ft Lauderdale or Dons Salvage in Clearwater.


Thank you, I've tried Sailorman but haven't heard of Don's salvage.

Ron Wilson

Don's has a lot of good stuff. They get new stock from discontinued models
as well as salvage. The couple times I've been there I ended up bringing
home a trunk full of stuff I didn't know I needed....
Good luck.


People like Ron are usually way to cheap to actually buy things. He'd rather
go around and mooch things for free. His boat looks like a wreck. That
particular model was ugly when it was brand new. A forty-five year old wood
boat??? What good is that?


Wilbur Hubbard



Damn! I reinstalled my Newsgroup reader (in Virtualbox) and forgot to
re-install Willy-Boy's permanent kill filter so here he is again......
Just as stupid as he was before I kill-filed him.

I reckon he must be one of those ol-boys that jest can't learn.
Aw well, back he goes in the Kill File.


Cheers,

Bruce

Ron Wilson wrote:
On Sat, 14 Feb 2009 11:34:38 -0500, "mmc" wrote:

"Ron Wilson" wrote in message
...
Hi everyone,

I need a replacement foredeck hatch for my 1963 28 foot Owens. It's
the type that is metal, round with glass in it and has 3 arms
protecting the glass. I dropped the anchor on it, bent 2 arms and
fractured the glass which now leaks. The boat is a full restoration so
I would prefer an exact replacement if possible. If you know of one,
or of a boat being parted out or of any other soure, please let me
know. I think the hatches were all the same on these boats over a
period of 6 years, so my chances of finding one aren't too remote.
Just remove INVALID from the email address to reply. I live in
southern Florida so if you are in the area I can drive over to pick it
up. Thanks,

Ron Wilson
Might try Sailorman in Ft Lauderdale or Dons Salvage in Clearwater.


Thank you, I've tried Sailorman but haven't heard of Don's salvage.

Ron Wilson
If its not too badly bent, why not re-glaze the existing hatch?

--
Ian Malcolm. London, ENGLAND. (NEWSGROUP REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & 32K emails -- NUL:

On Sun, 15 Feb 2009 00:27:17 +0000, IanM
wrote:

Ron Wilson wrote:
On Sat, 14 Feb 2009 11:34:38 -0500, "mmc" wrote:

"Ron Wilson" wrote in message
...
Hi everyone,

I need a replacement foredeck hatch for my 1963 28 foot Owens. It's
the type that is metal, round with glass in it and has 3 arms
protecting the glass. I dropped the anchor on it, bent 2 arms and
fractured the glass which now leaks. The boat is a full restoration so
I would prefer an exact replacement if possible. If you know of one,
or of a boat being parted out or of any other soure, please let me
know. I think the hatches were all the same on these boats over a
period of 6 years, so my chances of finding one aren't too remote.
Just remove INVALID from the email address to reply. I live in
southern Florida so if you are in the area I can drive over to pick it
up. Thanks,

Ron Wilson
Might try Sailorman in Ft Lauderdale or Dons Salvage in Clearwater.


Thank you, I've tried Sailorman but haven't heard of Don's salvage.

Ron Wilson
If its not too badly bent, why not re-glaze the existing hatch?


The problem is 2 of the 3 arms protecting the glass were bent and then
broke in 2 when I tried straightening them out. If I can't find a
replacement I will reglaze and have 3 new arms machined from some
aluminum stock. The cost of machining greatly exceeds my anticipated
cost of the hatch. But thanks for the helpful suggestion.

Ron Wilson

Ron Wilson wrote:
On Sun, 15 Feb 2009 00:27:17 +0000, IanM wrote:

If its not too badly bent, why not re-glaze the existing hatch?


The problem is 2 of the 3 arms protecting the glass were bent and then
broke in 2 when I tried straightening them out. If I can't find a
replacement I will reglaze and have 3 new arms machined from some
aluminum stock. The cost of machining greatly exceeds my anticipated
cost of the hatch. But thanks for the helpful suggestion.

Ron Wilson

Fair enough. You didn't mention they had broken ;-(

For further reference, copper (brass/bronze) and aluminium alloys are
nearly all 'hot short', i.e. if you try to bend them hot, they *will*
tend to break, but if you'd heated the bars first, dull red hot for
copper alloys and till a streak of ordinary soap blackens for aluminium
alloys, you might well have annealed them enough to straiten them
successfully. Any chance they might be brazed or welded successfully?

I'm still not quite clear if the frame is aluminium alloy or bronze. I'm
leaning towards aluminium at the moment due to your choice for possible
parts. If you are willing to settle for rectangular bars of an off the
shelf section, why not do it yourself? Shouldn't be more than an hour's
work with a hacksaw and a file to make a straight bar to fit nicely.
With care and some paraffin or even WD40 as a cutting oil, aluminium is
easy enough to tap by hand for the fixings so you might even be able to
do it all on board and save the hassle of removing the hatch.

--
Ian Malcolm. London, ENGLAND. (NEWSGROUP REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & 32K emails -- NUL:

"Ron Wilson" wrote in message
...
On Sat, 14 Feb 2009 11:34:38 -0500, "mmc" wrote:


"Ron Wilson" wrote in message
. ..
Hi everyone,

I need a replacement foredeck hatch for my 1963 28 foot Owens. It's
the type that is metal, round with glass in it and has 3 arms
protecting the glass. I dropped the anchor on it, bent 2 arms and
fractured the glass which now leaks. The boat is a full restoration so
I would prefer an exact replacement if possible. If you know of one,
or of a boat being parted out or of any other soure, please let me
know. I think the hatches were all the same on these boats over a
period of 6 years, so my chances of finding one aren't too remote.
Just remove INVALID from the email address to reply. I live in
southern Florida so if you are in the area I can drive over to pick it
up. Thanks,

Ron Wilson
Might try Sailorman in Ft Lauderdale or Dons Salvage in Clearwater.


Thank you, I've tried Sailorman but haven't heard of Don's salvage.

Ron Wilson
Ron,
marinerecycle@ yahoogroups.com would be a good place to post your
requirement.
If you can't find a replacement and want a copy, a CNC machine shop could
probably make a new frame out of a big hunk of aluminum. Might be big $$.
http://www.plasticsupply.net/