Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I own a 34' sailboat that has a 1985 Yanmar 3GM30F that needs repaired.
Can't get the rpms out of it that I had in the past plus I am blowing some black smoke and while in the slip if I give it hard throttle I can see black floating on the water. This all occurred after the injector pump was replaced and adjusted by a yard mechanic. My max rpm's in the past was 3200 -3300 which could be more but is limited by the throttle hitting my steering pedestal guard. Right now I am getting just 2800 rpms max. After the suggestion from the mechanic I replaced the old fuel with new fuel and filters and some hoses were replaced. Fuel line is clean. Fuel tank pickup is clean and not clogged, tank is clean. I am tired of playing with the problem. It has been almost 2 months since I have been on the water. I am looking for recommendations on a good marina for repairs somewhere from Annapolis North to Pooles Island. Thanks |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Source for gel coat repair material? | Boat Building | |||
Marine A/C - To repair, or not to repair? | General | |||
Any boat repair will take longer and cost more than originally guessed! | General | |||
Advice needed: seat vinyl rip repair | Cruising |