I have Volvo MD7A, 13 hp two cylinder unit with salt water cooling.

Runs perfectly with one exception, it occasionally overheats and I can't
figure out what the heck is going on. I bought the boat used and the
previous owner had fitter her out himself. Every time she overheats, I
find something to "fix" after which she is fine for a spell then she
will overheat again. Clearly I'm not getting to the root cause.
Generally she will seem to be running along just fine and all of a
sudden the pressure gauge just goes up, up, up. It seems to be a
bi-state kind of thing, it either works perfectly well or not at all.
Its almost as if there is a ball valve or something somewhere that is
sticking. It's obviously not a bad gage.

The plumbing goes like this:
Through hull fitting
Salt water strainer
Tap to the transmission/engine
Tap to secondary pick up from bilge
Tap to sinks


Here is some of the history and what I had done, in each case I have
also checked/changed the impeller. They usually look just perfect.

1: Recently fitted salt water strainer seemed to be blocked with debris
from its construction. It is home built out of some interlocking pieces
of PVC pipe, the inner piece has a zillion small holes drilled in it. I
dumped this stuff out and she was fine.

2: Found a small leak in the copper pipe from the transmission to the
impeller. I thought that maybe it was sucking in air and the impeller
was getting air bound. Repaired the leak.

3: Moved and lowered the salt water strainer. This was mounted pretty
high on a bulkhead with real long hoses. I moved it to the engine
compartment and lowered it. I thought that maybe there was just too
much suction head to get the water going.

4: Threw thermostat overboard.

Any clues?

Many thanks,

Howard