Home |
Search |
Today's Posts |
#4
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
From an Imron activator MSDS
Inhalation: May cause nose and throat irritation. May cause nervous system depression, characterized by the following progressive steps: headache, dizziness, nausea, staggering gait, confusion, unconsciousness. Reports have associated repeated and prolonged overexposure to solvents with permanent brain and nervous system damage. If this product contains or is mixed with an isocyanate activator/hardener, the following health effects may apply: Exposure to isocyanates may cause respiratory sensitization. This effect may be permanent. Symptoms include an asthma-like reaction with shortness of breath, wheezing, cough or permanent lung sensitization. This effect may be delayed for several hours after exposure. Repeated overexposure to isocyanates may cause a decrease in lung function, which may be permanent. Individuals with lung or breathing problems or prior reactions to isocyanates must not be exposed to vapors or spray mist of this product. .... Respiratory protection Do not breathe vapors or mists. If this product contains isocyanates or is used with an isocyanate activator/hardener, wear a positive-pressure, supplied-air respirator (NIOSH approved TC-19C) while mixing activator/hardener with paint, during application and until all vapors and spray mist are exhausted. If product does not contain or is not mixed with an isocyanate activator/hardener, a properly fitted air-purifying respirator with organic vapor cartridges (NIOSH TC-23C) and particulate filter (NIOSH TC-84A) may be used. Follow respirator manufacturer's directions for respirator use. Do not permit anyone without protection in the painting area. Individuals with history of lung or breathing problems or prior reaction to isocyanates should not use or be exposed vapor or spray mist if product contains or is mixed with isocyanate activators/hardeners. .... Some of us value our brain cells. "Joe Bleau" wrote in message ... On Wed, 18 Apr 2007 19:20:40 -0400, "Jim Conlin" wrote: The linear polyurethane (LPU) paints such as Imron, Awlgrip and Perfection contain cyanide compounds which are VERY TOXIC. These compounds cause brain, liver and lung damage. When the paints are rolled or brushed, the nasty stuff stays on the boat and only solvents get into the air. An organic vapor respirator can deal with that. When the PAINTS are sprayed, an aerosol of paint droplets, containing the nasty cyanide compounds, is in the air. The only breathing apparatus which effectively protects the painter are the 'supplied air' respirators. These start at about $1K. An ordinary respirator won't do it.. DO NOT SPRAY LPU PAINTS WITHOUT ONE. I ask for info on these paints and I get a lecture on safety instead of a little help with my questions. I am aware of their toxicity and I use equipment to protect myself. As an aside I might tell you that countless boat yards and auto body shops in the United States and other first-world countries thousands of gallons of this stuff without "supplied air" respirators. A good fitting mask with the proper cartridge is adequate for my purpose. Tell me, Jim, isn't boating a bit dangerous for someone with your safety concerns. After all, there are all sorts of dangers in going around the water. Additionally, if you want a "supplied-air" respirator you can find plans all over the web to build one for less than $100. You don't have to look for something with where prices "start at 1K." Thanks, though for thinking about the safety of others. Regards, Joe |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Looking at a 1994 Zodiac boat -- potential transom/glue issues? | General | |||
Brush painting technique | Boat Building | |||
Painting with Two-Pack | Boat Building | |||
car top hull issues | Touring |