Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
I would hate to think of all the chemicals giving off by a modern boats
burning interior before the fire even gets to the spray foam. I think any fumes given off by the foam burning will be the least of your worries - if you are not out of the boat by then, then you probably are not escaping at all. The myth of foam burning seems to persist - the company who sprayed my vessel used a fire rated/retardant material. |
#2
![]()
posted to rec.boats.building
|
|||
|
|||
![]() Well, each to his own, but I have experienced burning urethane foam once and was lucky to survive it. Before I put _any_ foam in a boat I would want to see rigorous test data fromsomeone besides the salesman. As to other chemicals, consider frayed insulation on a wire behind a bulkhead that eventually sparks enough against the hull or another wire to get things going. I've seen it happen,both in boats and in houses. Not for me, thanks. "CS" wrote: I would hate to think of all the chemicals giving off by a modern boats burning interior before the fire even gets to the spray foam. I think any fumes given off by the foam burning will be the least of your worries - if you are not out of the boat by then, then you probably are not escaping at all. The myth of foam burning seems to persist - the company who sprayed my vessel used a fire rated/retardant material. Michael Porter Naval Architect / Boatbuilder mporter at mp-marine dot com www.mp-marine.com -- Posted via a free Usenet account from http://www.teranews.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Steel hull and aluminum superstructure | Boat Building | |||
Need a new yacht - steel hull, plenty of crew space .... | ASA | |||
Best paint system for bare steel hull? | Boat Building | |||
Steel hull - electrical ground | General | |||
Steel hull - electrical ground | Boat Building |