Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
Since I will be instructing I don't want too many due to safely reasons
so 5 divers plus myself would be plenty. A boat this size would definitely allow that many and their gear. Rob John Cassara wrote: How many divers and their gear do you expect to safely put on a 20' boat? As the line in Jaws goes " We need a bigger boat!" "platapus03" wrote in message news:Vnxug.4646$A8.1679@trnddc02... "drake" wrote in message ups.com... I am looking at obtaining an older 20' fiberglass Crestliner boat with a Johnson 140 on it. It is out of the water on a trailer and where the keel sits on the front roller it has damaged the fiberglass leaving an indentation. I have looked at it and found water drops in that location. There is no way this could be rain water. The seller is claiming it has been out of the water for over a year except for the short trip from his cottage to the marina where he put it on the trailer. There is an hour meter on the boat which has 492 hours on it. I don't know if this works or if it was installed when the boat was new. My first question is, can the fiberglass inside the gel coat become waterlogged? Yes. Secondly, I believe there is Styrofoam flotation between the hull and the floor, is it possible for this material to become water logged if the water got past the fiberglass. Yes. If there is water in the fiberglass, is it possible to get it out? Yes, but you have to consider if the finished boat is worth putting that much effort into. You need to cut out the bad fiberglass and open up the waterlogged areas to get them completely dried out. Make sure ALL the old foam is removed as it can easily be replaced with two-part (pour in place) foam. Then all the fiberglass needs to be completely sealed back up to prevent future water intrusion. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
fibreglass waterlogging | General | |||
Repair to fibreglass boat | Boat Building | |||
fibreglass repair | General | |||
Fibreglass plug paint problem | Boat Building | |||
Transom screw holes in fibreglass for transducer | Boat Building |