Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Questions about Fiberglassing Wood - OurBoat.jpg (0/1)
He has made two posts asking the same question. He did not say the
bottom was rotting or in need of major repairs. Just that he wanted to "protect" it. He didn't listen the first time so I figured a bit stronger language was called for. Matt Langenfeld wrote: ok let's not jump this guy and tell him he's wrong for wanting to do this project until he has a chance to better describe his situation. We could all be wrong here. Glenn Ashmore wrote: I know how to estimate your glass requirements but it would be immoral to tell you. I will repeat: Fiberglass sheathing an older carvel planked hull is a sure way to a quick death. It should only be done to squeeze an extra few years out of a hull that is unsalvageable otherwise. If you want advice from the real experts, sign into the Woodenboat Magazine repair forum at http://www.woodenboat.com/ and ask. 90% of those guys restore classic wooden boats. Some have several hulls under their belts and know what they are doing. You will definitely get some responses. That question is like waving a red flag at a bull on that forum. As to the paint: Marine topsides paints should never be applied below the waterline. A high quality anti-fouling bottom paint is made for that. There are many on the market with various formulations. Some work better in warm water and others in cold. It is best to ask around your marina/boatyard and find out which brand works best in your area. -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com |
#2
|
|||
|
|||
Questions about Fiberglassing Wood - OurBoat.jpg (0/1)
Actually, that advice was just what i was looking for. i wasn't even
sure if i could do it but you answered my questions correctly. the reason i posted twice is because the first message i posted like 15 hours before the second but it still didn't show up on my newsreader so i thought that it didnt go through. Anyways guys, thanks for the advice, ill replace any rotten planks i see on the hull after sanding and stuff before using antifouling paint and caulking. Much Obliged -Jay. On Thu, 10 Jun 2004 21:58:20 -0400, Glenn Ashmore wrote: He has made two posts asking the same question. He did not say the bottom was rotting or in need of major repairs. Just that he wanted to "protect" it. He didn't listen the first time so I figured a bit stronger language was called for. |
#3
|
|||
|
|||
Questions about Fiberglassing Wood - OurBoat.jpg (0/1)
Good to hear you're making the right, and informed, decision.
Now if you'll excuse me....I have to go get this shoe taste out of my mouth. Jason wrote: Actually, that advice was just what i was looking for. i wasn't even sure if i could do it but you answered my questions correctly. the reason i posted twice is because the first message i posted like 15 hours before the second but it still didn't show up on my newsreader so i thought that it didnt go through. Anyways guys, thanks for the advice, ill replace any rotten planks i see on the hull after sanding and stuff before using antifouling paint and caulking. Much Obliged -Jay. On Thu, 10 Jun 2004 21:58:20 -0400, Glenn Ashmore wrote: He has made two posts asking the same question. He did not say the bottom was rotting or in need of major repairs. Just that he wanted to "protect" it. He didn't listen the first time so I figured a bit stronger language was called for. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wood rot in sheathed 1876 Smack | Boat Building | |||
Composite stringer grids | General | |||
2 newbie questions... | General | |||
Steam bending basics?? | Boat Building | |||
Lumber questions | Boat Building |