Menu

Ply tinnie replacement needed

Search this Thread

Prev

Previous Post

Next Post

Next

#16

Report Post

Old Nick

Posts: n/a

Default

Ply tinnie replacement needed

On 7 May 2004 22:44:20 -0700,
(peterMelbourneAustralia) vaguely proposed a theory
.......and in reply I say!:
remove ns from my header address to reply via email

OK. You are not a Troll. You replied.
But you replied to those nthat "suited you"

Hve you made a decision?

My fahter, 72, is finding his 12ft fiberglass boat to heavy to launch
by himself and needs a lighter boat.

The present boat has a 5hp outboard, solidly built, seaworth and has a
deep keel, unfortunately it is also a little heavy.

Was thinking of the 12ft version of John Welsford's Trover (without
well).

Dad's boat must be fast to build (not complicated), for motoring only
(sailing boats need not apply!!!), seaworthy, light, easy to build (a
few panels of marine ply) and not overly expensive. Basically he needs
a ply version of what we in australia call a 'tinnie'.

Thr Trover (12ft vers) is 12ft long, 4'7 beam. In cross section it is
made of only 5 panels (narrow flat bottom and two panels on each
side). Flat bottomed punts need not apply.

N. Peter Evans

************************************************** *****

Sometimes in a workplace you find snot on the wall of
the toilet cubicles. You feel "What sort of twisted
child would do this?"....the internet seems full of
them. It's very sad

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is Off HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
chrysler 9.9 impeller replacement??? (Sailer 250)	mark s	General	0	July 13th 04 06:24 PM
Mercruiser 3.0 litre help needed.	CCred68046	General	4	January 1st 04 04:43 PM
Price for Intake Manifold & Thermostat Housing Replacement (MECHANICS PLEASE COMMENT)	Matt	General	0	December 12th 03 03:54 AM
Looking for replacement sterndrive 'screens'?	Joe Webster	General	5	October 6th 03 01:44 AM
Chaparral Lettering Replacement	Matt	General	2	July 28th 03 01:47 PM

All times are GMT +1. The time now is 08:23 AM.

About Us

"It's about Boats"

Contact Us BoatBanter Home Privacy Statement

Copyright © 2017