Thankyou to all those that have given me help either direct e-mail or
through this news group.
Sorry if the mention of free plans has offended (
I presumed as news groups are free, that we are all asking for and giving
free information, it would not be a problem?
I will probably end up using a CAD program from a binary NG (for free) and
use it to design my own boat. I was simply asking for a few lines as a
guide to start from. if my plan is then of use to anyone else I will pass it
to them for nothing. . .
Cheers,
Stuart.

wemfish says:

Sorry if the mention of free plans has offended (

Not so much offended, as the fact that you are the latest in a long line of
folks looking for free plans. An admirable search, to be sure, but some of us
make a living drawing said plans, and if we give them away, the kids whine with
hunger. ;-)

I presumed as news groups are free, that we are all asking for and giving
free information, it would not be a problem?

No more than walking into a pub (which is free) and expecting free whiskey for
the night. If you see what I mean.

I will probably end up using a CAD program from a binary NG (for free) and
use it to design my own boat.

If you have questions about design, please feel free (no pun intended) to post
them here. There are a number of qualified folks who are happy to help out.

I was simply asking for a few lines as a
guide to start from.

See the booklist in Scotty's post - it is a good one, and will definately get
you started in the right direction.

Steve
Stephen C. Baker - Yacht Designer
http://members.aol.com/SailDesign/pr...cbweb/home.htm

"wemfish" (wemfish AT tiscali.co.uk) writes:

I will probably end up using a CAD program from a binary NG (for free) and
use it to design my own boat. I was simply asking for a few lines as a
guide to start from. if my plan is then of use to anyone else I will pass it
to them for nothing. . .

for plywood construction teh Carslon program (www.carlsondesign.com) has
example files for quite a few small boats. if you interested in a simple
flat bottom skiff or dory type you can use the free Basic program in the
Boats section of my website to try different dimensions and get a table of
offsets to start with in graphics CAD programs. (dories don't sail very
well because of the extreme curvature along the chines.)


--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned

(William R. Watt) freed themself from bondage,
long enough to scribble:

(dories don't sail very
well because of the extreme curvature along the chines.)

Is this true of the larger dories ... 34 to 37 ft Benford designs, for
example?

steveb

steveb ) writes:
(William R. Watt) freed themself from bondage,
long enough to scribble:

(dories don't sail very
well because of the extreme curvature along the chines.)

Is this true of the larger dories ... 34 to 37 ft Benford designs, for
example?

sorry, I don't know. I've read there is to much weather helm in dories.
I'm sure that would depend on the radius of curvature of the side. Longer
boats with greater length-to-beam ratio would not have as much curvature.
I don't know how they get the beaminess or draft to carry sail without
excessive heeling - fill them to the gunwales with fish for ballast?

--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned

steveb wrote in message . ..
(William R. Watt) freed themself from bondage,
long enough to scribble:

(dories don't sail very
well because of the extreme curvature along the chines.)

Is this true of the larger dories ... 34 to 37 ft Benford designs, for
example?

steveb

In my opinion, it was and is a wrong headed assumption. Dories with
extreme curvature at the chines may not sail well, but there are
plenty of Dories that do not have this characteristic.

"wemfish" wemfish AT tiscali.co.uk wrote in message ...
Thankyou to all those that have given me help either direct e-mail or
through this news group.
Sorry if the mention of free plans has offended (
I presumed as news groups are free, that we are all asking for and giving
free information, it would not be a problem?
I will probably end up using a CAD program from a binary NG (for free) and
use it to design my own boat. I was simply asking for a few lines as a
guide to start from. if my plan is then of use to anyone else I will pass it
to them for nothing. . .
Cheers,
Stuart.

Really not offended at all and I was not trying to paint the whole
group or shape usenet, it is still free and you do not need to shy
about asking for free info, just know that some (even myself at times)
do take things wrong sometimes. Anyway, glad to have you here, hope
you find your boat. Like I said, look at the Gardner books, plenty of
great hulls to choose from, many with offsets, just prime for entering
into cad programs.
Scotty