Hi all

my boat has a pair of Carter 9772S carbs.
any idea of where to get a rebuild kit or a Edelbrock cross referance
for a new carb?

Thanks

M

Mechanical or vacuum secondaries? You just need to match the cubic feet per
minute (CFM) to put a new carb on. You'd be better off finding out what
intake manifold that you've got, then match to that. You should be able to
reference your motor's cubic inches against various manufacturer's
carburetors to find out the range of choices that will work, and you can
measure the inside diameter of the venturies so you can compare to the
replacement carbs ...similar venturies will demonstrate similar CFM. But if
it were me, I'd find out what kind of intake that I had, then I'd find a
carb that I like for the rpms and cubic inches of the motor, then I'd buy or
make an adapter plate to make the new carbs work on the old intake.

Sticking with Carters are fine. I like Rochesters too. I don't like
Holley, and I haven't tried others.

Brian D


"Big gus" wrote in message
...
Hi all

my boat has a pair of Carter 9772S carbs.
any idea of where to get a rebuild kit or a Edelbrock cross referance
for a new carb?

Thanks

M

I used to do a lot of business with these people
years ago and they were great, they could find
any obscure part that existed. At the time I was
selling a lot of carb parts for supercharged
Studebakers...

Try he

Battery Ignition & Fuel Systems
91 Meadow Street, Hartford, CT 86114

Tel: 860 296 4215

Biscokid at aol.com

or

Battery Ignition & Fuel Systems, LLC

319 Main Street

Manchester, CT 06040

Tel: 860-646-4594

Fax: 860-646-4637

Good Luck,
--
Phil Davis
247PalmBeachRE.com


"Big gus" wrote in message
...
Hi all

my boat has a pair of Carter 9772S carbs.
any idea of where to get a rebuild kit or a Edelbrock cross referance
for a new carb?

Thanks

M

do a google serach for carter carburetor and you will find companies like
Carbs Unlimited , ect, that would be a good starting place.

--
Ron White
Boat building web address is
www.concentric.net/~knotreel