Yes, they do sell flexible attachments for rotary drills. I saw one at Home
Depot the other day. They also have them for Dremel tools.

--


Keith
__
Monday is an awful way to spend 1/7th of your life.
"William R. Watt" wrote in message
...
a series of holes drilled with a 90 deg attachment?
do they sell flexible extensions for rotary drills?
--
--------------------------------------------------------------------------
----
William R Watt National Capital FreeNet Ottawa's free community
network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned

I am wondering if heat will work. The guy who hosts the DuckWorks site
wrote about cleaning up cured epoxy squeeze out on a lapstrake canoe by
heating it with a "heat gun" (some sort of hair drier?) and scraping off
the softened resin. With the resin softened maybe the glass tabbing could
be cut with a utility knife. There would be no dust flying about.


--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned

You have to be careful when using a heat gun. It tends to delaminate epoxy
and glass from the wood when it softens on top of wood that's getting hot.
I believe the wood is probably outgassing underneath the laminate from the
heat. Use the gun, but sparingly and in small doses.

Brian

--
http://www.advantagecomposites.com/tongass -- My 22' Tolman Skiff project
http://www.advantagecomposites.com/catalog -- Discounted System Three
Resins products


..
"William R. Watt" wrote in message
...
I am wondering if heat will work. The guy who hosts the DuckWorks site
wrote about cleaning up cured epoxy squeeze out on a lapstrake canoe by
heating it with a "heat gun" (some sort of hair drier?) and scraping off
the softened resin. With the resin softened maybe the glass tabbing could
be cut with a utility knife. There would be no dust flying about.


--
--------------------------------------------------------------------------
----
William R Watt National Capital FreeNet Ottawa's free community
network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned