Glenn,
Not that I think this will be a problem, but an accumulator will not protect
the valve from inertia shock unless it is installed next to the valve. The
hose is a good idea.
Steve
"Glenn Ashmore" wrote in message
news:gXhdc.2173$4Y2.1705@lakeread04...


Adam wrote:

Thanks a lot.
Adam
Glen - those two loops are not supplied with this system.
It is specified by Installation and Operation Instruction as requirement


Oh, I am using accumulators.
--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com