Water Pressure System WSC-60
 

I just bought Water Pressure System WSC-60 by GROCO
(I was inspired by Glen)
My question is - what for they are two loops 12" of Coiled Hose before and
after the pump.
Thanks in advance
Adam

Water Pressure System WSC-60
 

Can't help. Mine didn't ahve anything but the pump, check valve and
pressure switch. No extra tubing.

Adam wrote:

I just bought Water Pressure System WSC-60 by GROCO
(I was inspired by Glen)
My question is - what for they are two loops 12" of Coiled Hose before and
after the pump.
Thanks in advance
Adam



--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

Water Pressure System WSC-60
 

I would assume that the 12" coil would be to allow for some "jolting" as
pressure came in. Kind of a "hose spring"

Steve

Water Pressure System WSC-60
 

Shock absorber. It will reduce the high pressure peak when the water starts
and stops flowing.
Steve
"Adam" wrote in message
...
I just bought Water Pressure System WSC-60 by GROCO
(I was inspired by Glen)
My question is - what for they are two loops 12" of Coiled Hose before and
after the pump.
Thanks in advance
Adam

Water Pressure System WSC-60
 

Thanks a lot.
Adam
Glen - those two loops are not supplied with this system.
It is specified by Installation and Operation Instruction as requirement

"Steve Lusardi" wrote in message
...
Shock absorber. It will reduce the high pressure peak when the water
starts
and stops flowing.
Steve
"Adam" wrote in message
...
I just bought Water Pressure System WSC-60 by GROCO
(I was inspired by Glen)
My question is - what for they are two loops 12" of Coiled Hose before
and
after the pump.
Thanks in advance
Adam

Water Pressure System WSC-60
 

Adam wrote:

Thanks a lot.
Adam
Glen - those two loops are not supplied with this system.
It is specified by Installation and Operation Instruction as requirement


Oh, I am using accumulators.
--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

Water Pressure System WSC-60
 

Glenn,
Not that I think this will be a problem, but an accumulator will not protect
the valve from inertia shock unless it is installed next to the valve. The
hose is a good idea.
Steve
"Glenn Ashmore" wrote in message
news:gXhdc.2173$4Y2.1705@lakeread04...


Adam wrote:

Thanks a lot.
Adam
Glen - those two loops are not supplied with this system.
It is specified by Installation and Operation Instruction as requirement


Oh, I am using accumulators.
--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com