Keel cooler cast into lead

posted to rec.boats.building

Hess cutter 56

Posts: n/a

Keel cooler cast into lead

I was planning to use pipe cast into the keel to cool the engine.!
{A Sabb 22hp}. The Keel cooler that came with the engine is 10' long
5/8 tubing My keel will be a long rectangle. Aprox. 10' x 15"x 15"
.. Glenn do you plan to use some type of flux on the tubing , Before
casting the lead ? And what type of wire do plan to use , To hold the
tubing in place Thanks CW

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is Off HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I'm ba aaaack!	jlr	ASA	191	March 2nd 06 10:03 PM
Keel bolt material	pete	Boat Building	7	February 16th 06 10:53 PM
Any thoughts onhow to make this boat better	[email protected]	ASA	82	January 24th 06 05:16 AM
Robbie's false PHRF rating! Too low!	Bob Crantz	ASA	6	November 15th 05 01:10 AM
where2 get cheap sounding lead ?	Courtney Thomas	Cruising	34	October 19th 05 09:02 PM

All times are GMT +1. The time now is 11:04 AM.

Menu

About Us