Home |
Search |
Today's Posts |
#1
posted to rec.boats.building
|
|||
|
|||
MiniCup
Took one of the MiniCups out on Lake Hall yesterday (Tallahassee, FL)
and had a nice sail. Sewn polytarp sail works very well. I have to use my dolly to carry her about 350' down a hill ot the water and the new dolly works very well. My dolly is based on two of the largest lawnmower wheels I could get from Lowes (These are the hard rubber non-inflatable type). I used a 1/2" hollow steel rod from lowes as an axle and two 1/8" thick Al tubes 2" diameter I had mistakenly bought for spars as the body with 2x4s across them held onto the tubes with U bolts. This works VERY well. I can carry both MiniCups and the dolly on the trailer. I'll try to post some pics of the Dolly on my web site. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
MiniCup sailing afternoon | ASA | |||
MiniCup Dolly | Boat Building |