Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
What paint to use
Personally, and I am sure there are other high tech solutions to this,
I would use interlux brightside polyurethane enamel. Proper surface preparation is important including silicone removal. It's easy to apply with a brush and properly done looks close to being sprayed. There are better systems but the cost and hazard are not warranted in my opinion on an older boat. Are you removing the old paint down to gel coat? What is the old paint? Mabey its just faded gel coat? How fancy a boat is it? What is the boat worth? How particular are you? These are the kinds of things you have to ask yourself before you begin. Pat wrote: Hi, I have an older fiberglass sailboat that has had a bad paint job. I am currently sanding and repairing the bad spots in preparation for painting. I would like some input as to what paint to use. I will be applying it with rollers and brushes. I can't afford to have it done and I'm not a spray guy. I have been looking at Awl grip but am told it's hard to apply and work with. What about polyester? Any help would be appreciated. It's probably been discussed many times but I'm new to the news group. Thanks, Pat |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
antifouling paint help | General | |||
Anyone know anything about Armorpoxy one part epoxy paint? | General | |||
Wanting to remove bottom paint, need advise | General | |||
engine paint in fuel system | General | |||
Removing bottom paint... | General |