I've had a sink drain hose fail without warning. It was a cheap currugated
hose. A fair bit of Atlantic came in before we figured out what had
happened. A bad day that I don't ever want to repeat.

"Pete C" wrote in message
...
On Wed, 08 Mar 2006 02:44:20 GMT, Peggie Hall
wrote:

And fwiw, I've NEVER seen any clear bilge discharge
hose. Boat builders are very cost conscious...if there weren't a good
reason to stick with marine-grade bilge pump hose, they'd use something
else that's cheaper.

What 's special about marine-grade bilge pump hose?

And also fwiw, I wouldn't use corrugated hose for
anything on a boat, anywhere.

Why not? It's pretty crush proof and kink proof. The stuff I'm
familiar with has a fairly smooth bore.

One drawback is that it's supposed to be terminated with wire hose
clamps which may be difficult to get in stainless.

For through hulls I'd look at using some *high* quality hose from the
through hull up to where the 'goose neck' loop would be, and then use
black corrugated hose after that.

But that's what I'd do. It's your boat...your choice.

Anyone had a bilge hose or non-engine hose failure? What sort of hose
was involved?

(x-posted to rec.boats.cruising and uk.rec.boats.power)

cheers,
Pete.

On Wed, 8 Mar 2006 17:01:07 -0500, "Jim Conlin"
wrote:

I've had a sink drain hose fail without warning. It was a cheap currugated
hose. A fair bit of Atlantic came in before we figured out what had
happened. A bad day that I don't ever want to repeat.

I see. Did it split on a bend, at the clamp, or just in a straight
run? Was it this sort of hose? :

http://www.pacificecho.com/120.htm

cheers,
Pete.

The hose was pretty similar to that stuff. Some hot water was put down a
galley sink drain and water started coming out of the cabinet under the
sink. It took a while to realize that it was seawater and that therefore
there was a lot more available than the gallon that had gone down the drain.
As I said, a bad day. I got religion.

"Pete C" wrote in message
...
On Wed, 8 Mar 2006 17:01:07 -0500, "Jim Conlin"
wrote:

I've had a sink drain hose fail without warning. It was a cheap
currugated
hose. A fair bit of Atlantic came in before we figured out what had
happened. A bad day that I don't ever want to repeat.

I see. Did it split on a bend, at the clamp, or just in a straight
run? Was it this sort of hose? :

http://www.pacificecho.com/120.htm

cheers,
Pete.

On Wed, 8 Mar 2006 19:27:30 -0500, "Jim Conlin"
wrote:

The hose was pretty similar to that stuff. Some hot water was put down a
galley sink drain and water started coming out of the cabinet under the
sink. It took a while to realize that it was seawater and that therefore
there was a lot more available than the gallon that had gone down the drain.
As I said, a bad day. I got religion.

$$$$ hose religion I expect...

cheers,
Pete.

Yup, and that religion has added up to 0.3% of the cost of owning that boat
over 25 years.
"Pete C" wrote in message
...
On Wed, 8 Mar 2006 19:27:30 -0500, "Jim Conlin"
wrote:

The hose was pretty similar to that stuff. Some hot water was put down a
galley sink drain and water started coming out of the cabinet under the
sink. It took a while to realize that it was seawater and that therefore
there was a lot more available than the gallon that had gone down the
drain.
As I said, a bad day. I got religion.

$$$$ hose religion I expect...

cheers,
Pete.