Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Curtis
 
Posts: n/a
Default Yanmar 1GM10 3 view drawing

I am looking for a source for a 3 view CAD (any format) drawing of this
engine. Thanks


  #2   Report Post  
terry
 
Posts: n/a
Default Yanmar 1GM10 3 view drawing

you might be able to go to their website and find dxf drawings but i doubt
you will find the 3d cad drawings.

i had the same issue with westerburke so i downloaded the dxf and created
the 3d drawings.

good luck


  #3   Report Post  
P.C.
 
Posts: n/a
Default Yanmar 1GM10 3 view drawing

Hi

"terry" skrev i en meddelelse
news
you might be able to go to their website and find dxf drawings but i doubt
you will find the 3d cad drawings.

i had the same issue with westerburke so i downloaded the dxf and created
the 3d drawings.

good luck


If you can get your hands on tradisional top, side, fornt view drawings, you
don't need much CAD skills, to produce a Solid with the same proportions as
the engine.
If what you need, is a Solid to subtract the engine foundations so the
engine will fit exactly in a new designs framework , 3 section drawings is
almost as good as a 3D model, ------- but you don't write if you want a 3D
true model, or just a shaped outher limits Solid.

P.C.
http://www.designcommunity.com/scrapbook/2995.html


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 12:00 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017