Home |
Search |
Today's Posts |
#1
posted to rec.boats.building
|
|||
|
|||
Heater hose conusdrum
OK. The Yanmar 4JH4 is on the stringers, exhaust run to the waterlock and
raw water hose is on the strainer. Now I turned my attention to running hoses to the water heater at the back of the engine compartment. The instructions suggest that to avoid air traps the hoses to the heater should be run below the level of the engine heat exchanger. BUT the inlet and outlet for the water heater feed is on top of the pump which is at the top front of the engine! -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Diesel heater opinions wanted | Cruising | |||
fuel line hose clamps | General | |||
question for peggie - hose fittings | Cruising | |||
Buddy Portable Catalytic Heater | Cruising | |||
Webasto DBW 2010 Coolant Heater safety recall: | General |