Menu

Anchor Pulpit Construction

Search this Thread

Prev

Previous Post

Next Post

Next

#10

Report Post

Maynard G. Krebbs

Posts: n/a

Default

Anchor Pulpit Construction

On 17 Dec 2003 19:53:52 -0800, (orbital) wrote:

Scotty, Thanks!

snip

Can you elaborate on the idea of pegging? I have an idea what you
mean, but am not sure exactly how this works. Do I make pegs from
dowel and drill corresponding sized holes into the strips? Is there a
technique for making sure they line up on the 2 strips? How many pegs
per strip should I use if the pulpit is to be 3 feet long? How deep
into the strips should I drill for the pegs?

snip

Rob

snip

My nephew is a cabinet maker and he uses a strip of peg-board as a jig
with a depth-stop collar on the drill bit. He just marks the holes he
wants to use on the jig. Small strips of wood on one side and both
ends are for alignment.
In your project you could lay the guide strips at the front and top
edges of your pulpit pieces. Drill, and on to the next piece of teak.
(If you did all the right sides first then flip the pieces and drill
the left sides, you won't have to flip the jig between work pieces.)

Mark E. Williams

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is Off HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hull Construction	Shirley Tremblay	General	1	July 15th 04 09:20 PM
Mirror Dinghy Construction Manual or Plans Required	[email protected]	General	6	July 12th 04 02:57 PM
Wood in new boat construction?	stealth	General	25	January 7th 04 11:03 PM
American White Oak vs Cedar in clinker construction	Al	Boat Building	15	September 22nd 03 06:42 PM
Inflatable Pontoon Construction	Shawn Gibbs	Boat Building	0	August 17th 03 03:58 AM

All times are GMT +1. The time now is 10:06 AM.

About Us

"It's about Boats"

Contact Us BoatBanter Home Privacy Statement

Copyright © 2017