Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
Here are two links to pictures I took of some real working dories on
Grand Manan Island. Everyone's dory, and there were a lot of them, was painted a different color. These boats were used for harvesting Dulse weed which is dried and sold as food. The dories had plastic looking bottom protecting panels that they said were "teflon". I asked the builder fellow, who built most of the dories, where he got the design and he said they were basically Lunenburg dories that were modified at the stern to accept a long shaft outboard. This is one of the few places I've seen in eastern Canada where real simple woodenboats are used for real work. except mabey the few remaining wood lobster boats in Maine. I wonder if anyone else knows of any other examples? http://www.geocities.com/boats2build2003/300dories.jpg http://www.geocities.com/boats2build2003/300dories2.jpg SteveJ Bert & Eileen Plank wrote: Hi, here in Newfoundland....."Dory Country".....we have alwaly used battleship Grey trimmed with green or Dory Buff trimmed with green and of course red antifouling on the botom. Bert Newfoundland Canada "Mike Brannon" wrote in message news:JvFCb.6129$J77.1966@fed1read07... Greetings to the group, I'm building a dory from a John Gardner book. It is a simple swampscott tender model. I have done a ocean of research on these craft and have yet to come across a description of the paint color scheme. All the pretty coffee table books with wood boats show few dories. All the old photos that I have found are black & white. So folks, what traditonal colors would look good on my dory (inside,outside,trim)? PS. I picked up a new Jet 14" bandsaw recently. It is the deluxe model with a 1 1/4hp motor. It is plenty powerful for oak and is remarkably quiet. The "do it yourself- backyard boatbuilder" this is about the largest saw to own without going commercial. For those of you that may be hunting for a wood band saw I rate it tops. Unfortunately it doesn't come with a fence. The Jet folks need to step up and offer one with the saw. :-( Best regards, Michael Brannon |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Speedometer not working | General | |||
antifouling paint help | General | |||
Anyone know anything about Armorpoxy one part epoxy paint? | General | |||
Wanting to remove bottom paint, need advise | General | |||
engine paint in fuel system | General |