Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
On Sun, 30 Nov 2003 20:41:15 GMT, "christos"
wrote: 18 feet boat with an outboard motor of 350 pounds at the aft end how much will submerged in the water the boat weights 1600 pounds without engine. christos Here's a person looking for a rough, rough estimate. Use an equivalent box of 9 X 7 ft that's 58530X gm for X submersion in cm 1600lb = 727273 gm So submersion is 727273 / 58530 = 12.4 cm = 5 inches. Another 2 inch aft with the motor. Brian W |
#2
![]() |
|||
|
|||
![]()
Or just get a coupla friends that weigh about 350 lbs and ... geez you know,
350 lbs is not that much :-) "Brian Whatcott" wrote in message ... On Sun, 30 Nov 2003 20:41:15 GMT, "christos" wrote: 18 feet boat with an outboard motor of 350 pounds at the aft end how much will submerged in the water the boat weights 1600 pounds without engine. christos Here's a person looking for a rough, rough estimate. Use an equivalent box of 9 X 7 ft that's 58530X gm for X submersion in cm 1600lb = 727273 gm So submersion is 727273 / 58530 = 12.4 cm = 5 inches. Another 2 inch aft with the motor. Brian W |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
OT Hanoi John Kerry | General | |||
offshore fishing | General | |||
Where to find ramp stories? | General | |||
Dealing with a boat fire, checking for a common cause | General | |||
Repost from Merc group | General |