Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
There is a design in that book named TitMouse.
The boat looks quite ugly on paper but I saw one in the water and it is a pretty boat IF you like old fashioned designs and accept less performance than a modern design. Don't forget to cover with linseed oil (first cold press only) after caulking with moss and tar because modern materials like epoxy don't work . .. . Just teasing the epoxy critics . . . -- Jacques http://www.bateau.com "Freddie Richard" wrote in message ... Yes that is the book, my questions are not specific. I'm just looking for some personal experiences with both to make my decision by. -- Thank You, Freddie L. Richard "William R. Watt" wrote in message ... "John Smith" ) writes: Hello, I've always wanted to build a boat and have decided to start with = one from a book by a man last named Rahl, I don't have it with me. I've = possibly "Boatbuilding in Your Own Backyard" by S S Rabl (1958)? worked with both wood and steal extensively and I am drawn towards wood. = If I were going to build with steal (metal) I would only need a few new = tools though. I'm just looking for personal experiences, mainly with = the Hull. any specific questions? -- -------------------------------------------------------------------------- ---- William R Watt National Capital FreeNet Ottawa's free community network homepage: www.ncf.ca/~ag384/top.htm warning: non-freenet email must have "notspam" in subject or it's returned |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
115 merc starting hard. | General | |||
Hard starting '93 Merc 4.3 I/O | General | |||
Starting Hints for Johnson 4 HP 2 cycle | General | |||
trainfan1/Rob 1973 Johnson 115 v4 Starting problems Stator/PowerPack? | General | |||
1973 v4 115 Johnson starting problem... Ideas | General |