Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
William R. Watt
 
Posts: n/a
Default cheap vacuum bagging

William R. Watt ) writes:

claims he got 25 psi vacuum for his


right. change "psi" to "lb".
--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned
  #2   Report Post  
jcassara
 
Posts: n/a
Default cheap vacuum bagging

Check out Harbor Freight. They sell a vacuum pump driven off
an air compressor for about $10. It is probably listed on
the web site as an automotive A/C part. I was in one of
their stores, it is packaged as an A/C evacuation pump.


John

"William R. Watt" wrote in
message ...
William R. Watt ) writes:

claims he got 25 psi vacuum for his


right. change "psi" to "lb".
--
----------------------------------------------------------

--------------------
William R Watt National Capital FreeNet Ottawa's

free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject

or it's returned


  #3   Report Post  
Glenn Ashmore
 
Posts: n/a
Default cheap vacuum bagging

Those will work on a small bag for a few short sessions but they are
hard on a small air compressor when you need to hold a vacuum for
several hours. You would need to add a resin trap, tank, check valve,
solenoid and vacuum switch to save the compressor.

jcassara wrote:
Check out Harbor Freight. They sell a vacuum pump driven off
an air compressor for about $10. It is probably listed on
the web site as an automotive A/C part. I was in one of
their stores, it is packaged as an A/C evacuation pump.


John

"William R. Watt" wrote in
message ...

William R. Watt ) writes:


claims he got 25 psi vacuum for his


right. change "psi" to "lb".
--
----------------------------------------------------------


--------------------

William R Watt National Capital FreeNet Ottawa's


free community network

homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject


or it's returned



--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: some cheap boats in Ontario, Canada news General 0 July 11th 04 05:41 PM
FS: some cheap boats in Ontario, Canada news General 0 July 5th 04 02:03 PM
Dehumidifier Compressor for Vacuum Bagging Ken Kennedy Boat Building 9 October 1st 03 04:44 PM
Bateau Cheap Canoe....? James W. Sloan Boat Building 20 August 27th 03 09:11 AM
Vacuum bagging question Roger Boesch Boat Building 3 August 5th 03 10:23 AM


All times are GMT +1. The time now is 07:42 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017