) writes:
PL Premium is great stuff for putting molds together and other joints
that won't end up in your boat. But, I don't think it would work well
for fillets. It foams slightly and never level and it doesn't sand
well, What are your objections to using epoxy with thickener and
microballoons? That's what has evolved out of thousands of people
doing this.

for an update look at www.simplicityboats.com
--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-FreeNet email must have "notspam" in subject or it's returned

William R. Watt wrote:
) writes:
PL Premium is great stuff for putting molds together and other
joints
that won't end up in your boat. But, I don't think it would work
well
for fillets. It foams slightly and never level and it doesn't sand
well, What are your objections to using epoxy with thickener and
microballoons? That's what has evolved out of thousands of people
doing this.

for an update look at www.simplicityboats.com

I didn't see anything that conflicts with what I have said. It's a
great adhesive and I've used a lot of it over the past ten years and
have never had a failure. But, for making fillets, it sure wouldn't be
my choice.

Al