Scott Roper wrote:

I've read that people use a syringe to inject epoxy into holes. What type
of syringe is suited for this task, and where can I find one? I suppose
they are cheap enough to just dispose after use? Thanks

-Scott Roper




How big?


I used a length of clear plastic tube sized to fit in a regular
caulking gun. A rubber tip like a funnel from somewhere fit well. I
think the parts were originally part of an aquarium pump of some
sort. A plasic disk plug wrapped in saran wrap protected the
plunger on the caulking gun.

I mixed up thick goo, plopped it onto on a plastic sheet, rolled it
like a doobie, squeezed the goo into the tube like toothpaste,
pulling out the plastic sheet, put in the plug, and fixed a clear
hose on the end to squeeze the bog into the space between upper and
lower f/g on my side decking while replacing rotton balsa with old
plywood scraps.

Three gallons of epoxy bog!

The kit is still useable, cleaned in acetone promptly. Worked good.

I used plastic bagging like it was paper towel to wipe off gloved
hands, etc. You develop a method that works, after a few messes.

Terry K

& if you live in a small country town like me, go ask your local vet. (cat
size to elephant size) Don't ask your Chemist or else you get called a
"druggy" by the rest of the town as gossip likes to spread from them. (lol)
BruceM


"Terry Spragg" wrote in message
. cable.rogers.com...
Scott Roper wrote:

I've read that people use a syringe to inject epoxy into holes. What
type
of syringe is suited for this task, and where can I find one? I suppose
they are cheap enough to just dispose after use? Thanks

-Scott Roper




How big?


I used a length of clear plastic tube sized to fit in a regular
caulking gun. A rubber tip like a funnel from somewhere fit well. I
think the parts were originally part of an aquarium pump of some
sort. A plasic disk plug wrapped in saran wrap protected the
plunger on the caulking gun.

I mixed up thick goo, plopped it onto on a plastic sheet, rolled it
like a doobie, squeezed the goo into the tube like toothpaste,
pulling out the plastic sheet, put in the plug, and fixed a clear
hose on the end to squeeze the bog into the space between upper and
lower f/g on my side decking while replacing rotton balsa with old
plywood scraps.

Three gallons of epoxy bog!

The kit is still useable, cleaned in acetone promptly. Worked good.

I used plastic bagging like it was paper towel to wipe off gloved
hands, etc. You develop a method that works, after a few messes.

Terry K

& if you live in a small country town like me, go ask your local vet. (cat
size to elephant size) Don't ask your Chemist or else you get called a
"druggy" by the rest of the town as gossip likes to spread from them.
(lol)

Also if you buy "elefant size" siringes?
Let me understand... what kind of drugs are sold in your country?
^____^

Paolo

On Thu, 16 Sep 2004 11:12:17 +0200, "Paolo Zini"
vaguely proposed a theory
.......and in reply I say!:

remove ns from my header address to reply via email



& if you live in a small country town like me, go ask your local vet. (cat
size to elephant size) Don't ask your Chemist or else you get called a
"druggy" by the rest of the town as gossip likes to spread from them.
(lol)

Also if you buy "elefant size" siringes?
Let me understand... what kind of drugs are sold in your country?
^____^

Not very good ones G Mostly very good for hydration? GG
************************************************** ***
I know I am wrong about just about everything. So I
am not going to listen when I am told I am wrong about
the things I know I am right about.