Home |
Search |
Today's Posts |
#1
posted to rec.boats.building
|
|||
|
|||
Re-flooring my Marquis
Had some old plywood getting soft in the center, and decided to re-do
the floor. when we pulled off the old carpet which was weathered anyhow, we found out that in the times past someone had repaired the floor by cutting out a center section and replacing it with standard plywood. Evidently it had held for quite a while but it's days were numbered. besides it gave us a chance to inspect the stringers and other bracing etc. So, after thinking about the re-floor, we decided to not go with standard ply because it's not weather resistant, or marine due to the expense, so we settled on "DRYPLY" http://www.gp.com/build/product.aspx?pid=4882 A weather resistant plywood which has a lot of characteristics of marine plywood but is more cost effective. Like $23.00 a 3/4 sheet at Menards, and in stock too. Regardless. It ought to last way longer than I'll ever have the boat. |
#2
posted to rec.boats.building
|
|||
|
|||
Re-flooring my Marquis
"Tim" wrote in message
... Had some old plywood getting soft in the center, and decided to re-do the floor. when we pulled off the old carpet which was weathered anyhow, we found out that in the times past someone had repaired the floor by cutting out a center section and replacing it with standard plywood. Evidently it had held for quite a while but it's days were numbered. besides it gave us a chance to inspect the stringers and other bracing etc. So, after thinking about the re-floor, we decided to not go with standard ply because it's not weather resistant, or marine due to the expense, so we settled on "DRYPLY" http://www.gp.com/build/product.aspx?pid=4882 A weather resistant plywood which has a lot of characteristics of marine plywood but is more cost effective. Like $23.00 a 3/4 sheet at Menards, and in stock too. Regardless. It ought to last way longer than I'll ever have the boat. How well does it resin in? |
#3
|
|||
|
|||
How well did it work for you?
Quote:
|
#4
|
|||
|
|||
i was wet shrinking and it was a pain in the a. i havent tinted in years and i did my 05 corolla first then tried the grand marquis and i couldnt shrink it right
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Re-flooring my Marquis. | General | |||
Stripping the Marquis | General | |||
The Marquis has a dubious manifold... | General | |||
two days on the '23 ft. Marquis cuddie.... | General | |||
Do I need trim tabs on my 23' Marquis? | General |