Re-flooring my Marquis
Had some old plywood getting soft in the center, and decided to re-do
the floor. when we pulled off the old carpet which was weathered anyhow, we found out that in the times past someone had repaired the floor by cutting out a center section and replacing it with standard plywood. Evidently it had held for quite a while but it's days were numbered. besides it gave us a chance to inspect the stringers and other bracing etc. So, after thinking about the re-floor, we decided to not go with standard ply because it's not weather resistant, or marine due to the expense, so we settled on "DRYPLY" http://www.gp.com/build/product.aspx?pid=4882 A weather resistant plywood which has a lot of characteristics of marine plywood but is more cost effective. Like $23.00 a 3/4 sheet at Menards, and in stock too. Regardless. It ought to last way longer than I'll ever have the boat. |
Re-flooring my Marquis
"Tim" wrote in message
... Had some old plywood getting soft in the center, and decided to re-do the floor. when we pulled off the old carpet which was weathered anyhow, we found out that in the times past someone had repaired the floor by cutting out a center section and replacing it with standard plywood. Evidently it had held for quite a while but it's days were numbered. besides it gave us a chance to inspect the stringers and other bracing etc. So, after thinking about the re-floor, we decided to not go with standard ply because it's not weather resistant, or marine due to the expense, so we settled on "DRYPLY" http://www.gp.com/build/product.aspx?pid=4882 A weather resistant plywood which has a lot of characteristics of marine plywood but is more cost effective. Like $23.00 a 3/4 sheet at Menards, and in stock too. Regardless. It ought to last way longer than I'll ever have the boat. How well does it resin in? |
How well did it work for you?
Quote:
|
i was wet shrinking and it was a pain in the a. i havent tinted in years and i did my 05 corolla first then tried the grand marquis and i couldnt shrink it right
|
All times are GMT +1. The time now is 04:42 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com