| Home |
| Search |
| Today's Posts |
|
#2
posted to rec.boats.building
|
|||
|
|||
Re-flooring my Marquis
"Tim" wrote in message
... Had some old plywood getting soft in the center, and decided to re-do the floor. when we pulled off the old carpet which was weathered anyhow, we found out that in the times past someone had repaired the floor by cutting out a center section and replacing it with standard plywood. Evidently it had held for quite a while but it's days were numbered. besides it gave us a chance to inspect the stringers and other bracing etc. So, after thinking about the re-floor, we decided to not go with standard ply because it's not weather resistant, or marine due to the expense, so we settled on "DRYPLY" http://www.gp.com/build/product.aspx?pid=4882 A weather resistant plywood which has a lot of characteristics of marine plywood but is more cost effective. Like $23.00 a 3/4 sheet at Menards, and in stock too. Regardless. It ought to last way longer than I'll ever have the boat. How well does it resin in? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Re-flooring my Marquis. | General | |||
| Stripping the Marquis | General | |||
| The Marquis has a dubious manifold... | General | |||
| two days on the '23 ft. Marquis cuddie.... | General | |||
| Do I need trim tabs on my 23' Marquis? | General | |||
![Bob La Londe[_3_] is offline](https://www.boatbanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
