Home |
Search |
Today's Posts |
#3
![]()
posted to alt.sailing.asa
|
|||
|
|||
![]()
"katy" wrote in message
... Capt. JG wrote: 3 pts for the best answer. Fewer points for second, third best. You're sailing a 36' relatively modern sailboat sailing on a broad reach, starboard tack. To port is another sailboat also sailing on a starboard tack, approaching on a beam reach. Additionally, to starboard of your vessel is a sailboat under power. The pecking order is obviously, leward over windward, sail over power. Unfortunately, the sailboat under power is not giving way. You signal several times using various methods available, but they're distracted, don't respond, perhaps don't know what to do. You can't turn to starboard, because that would be directly into the sailboat under power. You can't jibe, because that would be directly into the approaching sailboat on the port. Time is rapidly running out to avoid a collision, which you're required to do. What are your options? What would you do? Douse your sails, turn in the engine and put your boat in reverese, then get on 17 and hail the engine powered boat, switch to an appropriate channel, and then serrtly tell them what's what... I'm assuming you mean 16. These are all good points, but not the fastest thing you can do, although dousing sails and reverse engine are legitimate things to try. It might be difficult to drop the main on a broad reach, although furling or dropping the jib would probably be possible, assuming you have enough time. 1 pt awarded for quick answer. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Another strip-plank question - a bit long | Boat Building | |||
Propeller efficiency question (electric) | Boat Building | |||
Other choice and counterpoise question | Electronics | |||
Exhaust question on inboard 1958 Chris Craft | Boat Building | |||
Sunday's VHF antics.....and a question.. | Electronics |