LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Aug 2006
Posts: 712
Default Wire Rigging for Ships

DSK wrote:
katysails wrote:
Too bad...the smell of hemp ropes is a nostalgic thing...maybe they can
put it in spray cans so they can spray it around boats fitted with wire
to keep the atmosphere...



Maybe the same folks would like clip-on gaff sails (tanbark of course),
instant baggywrinkle, and scurvy pills (one that give you scurvy, not
cure it). For that old-time deep-sea feeling.


Joe wrote:
I agree, you may be on to a good money making ideal.
I would like several nautical smells put in spray cans.

Cypress Boat Cabin
Oyster Reef at low tide
Spec Trout Water Mellon
Windward shore Mud
Open Ocean Breeze
Crazy Cajan Crab Boil


Don't forget these additions
"Fresh Paint" (available in Topsides or Anti-Fouling)
"Faint Whiff of Reliable & Well-Tuned Engine"
For the West Coasters, "Sea Lion on Nearby Channel Bouy"


And to spray people you hate!

3 day old Failed Freezer Squid
Holding Tank Horror
Poggie Boats of Cameron
And Fish Oil Spray


Gets rid of unwanted guests & mothers-in-law. How about one of my
favorites, "Burnt Wiring"

They already sell CDs of nautical sounds, but clearly there is room for
expansion in this market.

DSK

You
ve hit on another idea there....CD's....we could go back to the rude
anchorage discussion and make a CD called Banging Halyardsn,Choking
Diesel Engine, Bad Carburator Atomic 4, and Seagull Denied....
  #2   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 741
Default Wire Rigging for Ships

Do you refer to the Seagull outboard motor here? Certainly the noise and
smell of one of those would be highly nostalgic. I have one that is more
than 50 years old but I know it will start when I want it.

"katy" wrote in message
...
DSK wrote:
katysails wrote:
Too bad...the smell of hemp ropes is a nostalgic thing...maybe they

can
put it in spray cans so they can spray it around boats fitted with

wire
to keep the atmosphere...


Maybe the same folks would like clip-on gaff sails (tanbark of course),
instant baggywrinkle, and scurvy pills (one that give you scurvy, not
cure it). For that old-time deep-sea feeling.


Joe wrote:
I agree, you may be on to a good money making ideal.
I would like several nautical smells put in spray cans.

Cypress Boat Cabin
Oyster Reef at low tide
Spec Trout Water Mellon
Windward shore Mud
Open Ocean Breeze
Crazy Cajan Crab Boil


Don't forget these additions
"Fresh Paint" (available in Topsides or Anti-Fouling)
"Faint Whiff of Reliable & Well-Tuned Engine"
For the West Coasters, "Sea Lion on Nearby Channel Bouy"


And to spray people you hate!

3 day old Failed Freezer Squid
Holding Tank Horror
Poggie Boats of Cameron
And Fish Oil Spray


Gets rid of unwanted guests & mothers-in-law. How about one of my
favorites, "Burnt Wiring"

They already sell CDs of nautical sounds, but clearly there is room for
expansion in this market.

DSK

You
ve hit on another idea there....CD's....we could go back to the rude
anchorage discussion and make a CD called Banging Halyardsn,Choking
Diesel Engine, Bad Carburator Atomic 4, and Seagull Denied....



  #3   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Aug 2006
Posts: 712
Default Wire Rigging for Ships

Edgar wrote:
Do you refer to the Seagull outboard motor here? Certainly the noise and
smell of one of those would be highly nostalgic. I have one that is more
than 50 years old but I know it will start when I want it.

"katy" wrote in message
...
DSK wrote:
katysails wrote:
Too bad...the smell of hemp ropes is a nostalgic thing...maybe they

can
put it in spray cans so they can spray it around boats fitted with

wire
to keep the atmosphere...
Maybe the same folks would like clip-on gaff sails (tanbark of course),
instant baggywrinkle, and scurvy pills (one that give you scurvy, not
cure it). For that old-time deep-sea feeling.


Joe wrote:
I agree, you may be on to a good money making ideal.
I would like several nautical smells put in spray cans.

Cypress Boat Cabin
Oyster Reef at low tide
Spec Trout Water Mellon
Windward shore Mud
Open Ocean Breeze
Crazy Cajan Crab Boil

Don't forget these additions
"Fresh Paint" (available in Topsides or Anti-Fouling)
"Faint Whiff of Reliable & Well-Tuned Engine"
For the West Coasters, "Sea Lion on Nearby Channel Bouy"


And to spray people you hate!

3 day old Failed Freezer Squid
Holding Tank Horror
Poggie Boats of Cameron
And Fish Oil Spray

Gets rid of unwanted guests & mothers-in-law. How about one of my
favorites, "Burnt Wiring"

They already sell CDs of nautical sounds, but clearly there is room for
expansion in this market.

DSK

You
ve hit on another idea there....CD's....we could go back to the rude
anchorage discussion and make a CD called Banging Halyardsn,Choking
Diesel Engine, Bad Carburator Atomic 4, and Seagull Denied....



I was thinking of a squalling bird, but I do have knowledge of the
engine you're speaking of and yes, that would also fit....
  #4   Report Post  
posted to alt.sailing.asa
DSK DSK is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 1,419
Default Wire Rigging for Ships

Edgar wrote:
Do you refer to the Seagull outboard motor here? Certainly the noise and
smell of one of those would be highly nostalgic. I have one that is more
than 50 years old but I know it will start when I want it.


My father had one of these for one of his boats. He really
liked it although it seemed a bit cantankerous at the best
of times... I could rarely get it to run, and after a while,
hated it.

Since then I've sailed with other people who have much the
same results, including two who were expert mechanics and
claimed to know these engines intimately.

Maybe the secret to getting a Br-Seagul to "run when you
want it" is to only want it when it's already running. Or
maybe all the ones I've seen have been under a curse?

DSK

  #5   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 741
Default Wire Rigging for Ships

Once the motor has run in you need to ignore what they say in the
instruction book and cut back on the amount of oil you put in the mixture.
Otherwise the plugs keep oiling up.
Apart from oiled plugs dirt in the fuel is about the only thing that will
prevent it starting when you want it.
You only need three tools and you can fix any problem without removing the
motor from the boat.
And since the water pump impeller is metal not rubber you can run it up
ashore clamped in a vice if you are really worried whether it will start
sfter being neglected all winter...
"DSK" wrote in message
.. .
Edgar wrote:
Do you refer to the Seagull outboard motor here? Certainly the noise and
smell of one of those would be highly nostalgic. I have one that is more
than 50 years old but I know it will start when I want it.


My father had one of these for one of his boats. He really
liked it although it seemed a bit cantankerous at the best
of times... I could rarely get it to run, and after a while,
hated it.

Since then I've sailed with other people who have much the
same results, including two who were expert mechanics and
claimed to know these engines intimately.

Maybe the secret to getting a Br-Seagul to "run when you
want it" is to only want it when it's already running. Or
maybe all the ones I've seen have been under a curse?

DSK





  #6   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Aug 2006
Posts: 712
Default Wire Rigging for Ships

Edgar wrote:
Once the motor has run in you need to ignore what they say in the
instruction book and cut back on the amount of oil you put in the mixture.
Otherwise the plugs keep oiling up.
Apart from oiled plugs dirt in the fuel is about the only thing that will
prevent it starting when you want it.
You only need three tools and you can fix any problem without removing the
motor from the boat.
And since the water pump impeller is metal not rubber you can run it up
ashore clamped in a vice if you are really worried whether it will start
sfter being neglected all winter...
"DSK" wrote in message
.. .
Edgar wrote:
Do you refer to the Seagull outboard motor here? Certainly the noise and
smell of one of those would be highly nostalgic. I have one that is more
than 50 years old but I know it will start when I want it.

My father had one of these for one of his boats. He really
liked it although it seemed a bit cantankerous at the best
of times... I could rarely get it to run, and after a while,
hated it.

Since then I've sailed with other people who have much the
same results, including two who were expert mechanics and
claimed to know these engines intimately.

Maybe the secret to getting a Br-Seagul to "run when you
want it" is to only want it when it's already running. Or
maybe all the ones I've seen have been under a curse?

DSK



I liked the way it sounded..and jigged around...was a cute little
engine...had much more charavter than the Merc my Dad finally
bought..that was just boring...pull the string and it went...
  #7   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 834
Default Wire Rigging for Ships

DSK wrote:


Maybe the secret to getting a Br-Seagul to "run when you
want it" is to only want it when it's already running. Or
maybe all the ones I've seen have been under a curse?


Doug:

I think the ones you were dealing are exception, my brother in law has
one, 2 Hp. or so, starts and runs like a top, (well maybe more like a
treadle powered Singer) It's got a ridiculous 4 blade prop that looks
like it was designed by a ten year old, 4 dead straight slaps attached
to a hub.

Cheers
Marty

DSK

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Running Trailer Wire Bose General 2 July 26th 06 06:30 PM
Rod Rigging - Hype? Bob Crantz ASA 29 January 5th 06 03:16 PM
Mercruiser alternator wire overheating - engine stops - tip Dick Harper General 0 September 23rd 04 07:07 AM
If you have to solder engsol Cruising 6 June 1st 04 03:53 AM
Reusable rigging wire terminals besides Stalok, Norseman? santacruz Cruising 26 April 27th 04 03:43 PM


All times are GMT +1. The time now is 01:03 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017