OT; some Steamy pics for Doug...
 

"Matt Colie" wrote in message
...
But I still wish you had mor pictures of the assembled engine
from the
operating (valve gear) side.


I tried, but the room was dark and there's a big window in back
of the engine, so the pics didn't take.
here's the other side of the cylinder.

http://www.enter.net/photoalbum/data/sbvernon/32478.JPG

Scotty

OT; some Steamy pics for Doug...
 

Jelious?


"Capt. JG" wrote in message
...
What a gear head...

--
"j" ganz @@
www.sailnow.com

"Scotty" wrote in message
...
I took a Skinner, single cyl., horizontal steam engine out to
IN
last week. I think it's a Multi Flow.
These are the 3 big pieces to it. The smaller stuff will come
later.

http://www.enter.net/photoalbum/data...non/920863.JPG
http://www.enter.net/photoalbum/data...non/525767.JPG


The crank / flywheel / rotor assy. Weighs 9 ton.

http://www.enter.net/photoalbum/data/sbvernon/38778.JPG


This is the sister engine, one serial # apart. We set this
one up
about 10 years ago.
It's very dark in the powerhouse, so most pics came out too
dark.

http://www.enter.net/photoalbum/data...non/621374.JPG
http://www.enter.net/photoalbum/data...non/197707.JPG


--
Scott Vernon
Plowville Pa _/)__/)_/)_

OT; some Steamy pics for Doug...
 

Some places are replacing their steam engines with turbines. I've
delivered a few, then my buddy gets the old engines for next to
nothing ( save the time / cost of removal ).

Scotty




"Joe" wrote in message
ups.com...
Nice genset Scotty.

The Battle Ship Texas is full of Simplex Genset, pumps, ect.
Most are
turbin driven like such:


http://www.survivingworldsteam.com/a...P1010742.sized.
jpg

Steam 2 clyinder steering:


http://www.survivingworldsteam.com/a...P1010775.sized.
jpg

Even electric steering:


http://www.survivingworldsteam.com/a...P1010757.sized.
jpg

But here is where you end up when all else fails. Know to the
crew as
HELL.


http://www.survivingworldsteam.com/a...P1010756.sized.
jpg

If you like steam engines and such the battleship Texas is a
great ship
to visit. Thing I like is they let you explore on your own.

Joe

OT; some Steamy pics for Doug...
 

"Matt Colie" wrote


The flywheel is the giant ring with square holes (it is
painted). teh
square holes are for the guys like me to lock a jack in so the
engine
can be turned slowly and controlably for any of a number of
maintenance
procedures.


You've done that too, eh? I was amazed at how easy they turn the
first time I tried it.

SV

OT; some Steamy pics for Doug...
 

"Bob Crantz" wrote in message
k.net...
..

Looking at the pictures again, the big thing to the right of
the armature is
the stator. The armature has slid out of the stator.

look at this pic again. See the flywheel and to the right is the
stator, around the rotor. the stator still has it's lifting ring
in the top of it.

http://www2.enter.net/photoalbum/dat...non/197707.JPG




look at this pic and you'll see the outside of the flywheel is
painted.
http://www.enter.net/photoalbum/data...non/621374.JPG


Scotty

OT; some Steamy pics for Doug...
 

I was going by the picture on your truck.

I've touched the first AC generator in the world put to use. It is in
Telluride, CO and designed by Nikola Tesla. It now sits in a rust heap
beside the town museum.


"Scotty" wrote in message
...

"Bob Crantz" wrote in message
k.net...
.

Looking at the pictures again, the big thing to the right of
the armature is
the stator. The armature has slid out of the stator.

look at this pic again. See the flywheel and to the right is the
stator, around the rotor. the stator still has it's lifting ring
in the top of it.

http://www2.enter.net/photoalbum/dat...non/197707.JPG




look at this pic and you'll see the outside of the flywheel is
painted.
http://www.enter.net/photoalbum/data...non/621374.JPG


Scotty

OT; some Steamy pics for Doug...
 

Why didn't they preserve it?


"Bob Crantz" wrote in message
nk.net...
I was going by the picture on your truck.

I've touched the first AC generator in the world put to use. It
is in
Telluride, CO and designed by Nikola Tesla. It now sits in a
rust heap
beside the town museum.


"Scotty" wrote in message
...

"Bob Crantz" wrote in message
k.net...
.

Looking at the pictures again, the big thing to the right of
the armature is
the stator. The armature has slid out of the stator.

look at this pic again. See the flywheel and to the right is
the
stator, around the rotor. the stator still has it's lifting
ring
in the top of it.

http://www2.enter.net/photoalbum/dat...non/197707.JPG




look at this pic and you'll see the outside of the flywheel
is
painted.
http://www.enter.net/photoalbum/data...non/621374.JPG


Scotty

OT; some Steamy pics for Doug...
 

"Scotty" wrote in message
...
I took a Skinner, single cyl., horizontal steam engine out to IN
last week. I think it's a Multi Flow.
These are the 3 big pieces to it. The smaller stuff will come
later.

http://www.enter.net/photoalbum/data...non/920863.JPG
http://www.enter.net/photoalbum/data...non/525767.JPG


The crank / flywheel / rotor assy. Weighs 9 ton.

http://www.enter.net/photoalbum/data/sbvernon/38778.JPG


This is the sister engine, one serial # apart. We set this one up
about 10 years ago.
It's very dark in the powerhouse, so most pics came out too dark.

http://www.enter.net/photoalbum/data...non/621374.JPG
http://www.enter.net/photoalbum/data...non/197707.JPG

This is strictly out of my bailiwick, Scott, but I am very curious--what are
such engines used for? What sort of installations? And where in the
Hoosier State did it go?

Max

OT; some Steamy pics for Doug...
 

"Maxprop" wrote

This is strictly out of my bailiwick, Scott, but I am very
curious--what are
such engines used for? What sort of installations? And where
in the
Hoosier State did it go?

They power generators, for electric. Most are at lumber mills or
furniture plants where they burn the sawdust as free fuel. Many
of them came from different state gov'ts. where they were
powering state hospitals and prisons. Some were just sitting,
unused for years, in the basements of old factories.

I took this one to Rockville IN. West of Indy, on 36. Been there
about 8 times now. There's a great fishing creek right in back of
the power house. I then went to Allegan MI to pick up a pair of
big condensers (or evaporators).


--
Scott Vernon
Plowville Pa _/)__/)_/)_

OT; some Steamy pics for Doug...
 

Max,

The use is possibly interesting if you understand it.

These and many other engines and turbines were used for a very simple
reason:
It is cheaper to make high pressure steam than low. This is a curious
aspect of steam, the transition for liquid to gas take fewer BTUs per
pound as pressure increases.

So- why not make high pressure steam and then let the pressure down
before you send it off to heat buildings?
- Good Idea -
If you try to simply reduct the pressure you end up with velocity
problems. But, if you use the steam in something and then exhaust it at
the desired presure and temperature, you just got the steam qaulity you
wanted and some mechanical work done for the price of the steam.

The reason engines like this were contracted well into the 20th century
is also simple:
Turbines Want Superheated Steam.
Superheat is when something is heated to greater than the saturated
temperature at that pressure (15psi heated to 250F 212).
This requires an extras part in the boiler (steam generator) called a
superheater (-duh) and makes the operation of the plant much more critical.
Reciprocating engines find little value in superheat.

If the engine runs a generator (like this one did) it can offset the
elecric load required for any large facility. One place I worked years
ago had two of these side by side. Was very much like the pictured
unit. The other had a directly conected air compressor.

Matt Colie - Again

Maxprop wrote:



This is strictly out of my bailiwick, Scott, but I am very curious--what are
such engines used for? What sort of installations? And where in the
Hoosier State did it go?

Max