Knocked one out for you Scotty. Picture of it on the furled Genny (
3of3) I think

It was easier than digging mine out. Cut out of Tide Jug and scrape
line. The Tide label is still on the inside. I turn them inside out to
make the slide better.

$75.00 commercially (G) Help your selves group

Ole Thom


http://community.webtv.net/tassail/ThomsHomePage

Scott,

I stitch the line to the plastic. There shouldn't be any problem if you
would rather use nylon webbing. You can have the one in the picture or
make your own.
Let me know

OT


http://community.webtv.net/tassail/ThomsHomePage

Thanks Thom. I was thinking of the webbing to be softer on the rolled
sail, but now I see that the plastic is better for horizontal
adjustment. Do you hand sew right through the plastic bottle?

I went to the ATN site, and basically it's the same thing that you
made, maybe a little nicer looking, but for $75. And the red will
match my rolled jib.

If and when I get a chute, I'll get back to you.

Scotty


"Thom Stewart" wrote in message
...
Scott,

I stitch the line to the plastic. There shouldn't be any problem if
you
would rather use nylon webbing. You can have the one in the picture
or
make your own.
Let me know

OT


http://community.webtv.net/tassail/ThomsHomePage

Scott,

I stitch right thru the plastic. About every three inches two stitches
with the speed stitcher.

It may not be as pretty but you sure as hell can't beat the price.

Got to check back and see how you go wing-on-wing. I can't think of a
way that my gadget can do it?!?!

Ole Thom


http://community.webtv.net/tassail/ThomsHomePage

Scott,
In the picture I have one looped end of the line looped in the other.
This was just to hold it in place for picture taking. In use, each loop
goes in a shackle and the shackle pin goes thru the Spinnaker Tack.

Ole Thom


http://community.webtv.net/tassail/ThomsHomePage

Scotty,

I didn't mean wing-on-wing. It is made to order for that. Spinnaker and
Main Sail.

I was thinking about "Twin Head Sails" I sail this way often but when
I do I clip the Spinnaker Pole to the fore deck and extend the Spinnaker
Tack forward of the Bow pulpit, When I do this I can still use the 150
out the other side and drop the main in the Lazy Jacks.

Makes for easy down wind sailing and a wind shift will just collapse one
or the other head sails. No Gybing Boom coming across the cockpit.

Ole Thom


http://community.webtv.net/tassail/ThomsHomePage

I knew that's what you meant. Do you have a whisker pole for the 150?

Scotty


"Thom Stewart" wrote in message
...
Scotty,

I didn't mean wing-on-wing. It is made to order for that. Spinnaker
and
Main Sail.

I was thinking about "Twin Head Sails" I sail this way often but
when
I do I clip the Spinnaker Pole to the fore deck and extend the
Spinnaker
Tack forward of the Bow pulpit, When I do this I can still use the
150
out the other side and drop the main in the Lazy Jacks.

Makes for easy down wind sailing and a wind shift will just collapse
one
or the other head sails. No Gybing Boom coming across the cockpit.

Ole Thom


http://community.webtv.net/tassail/ThomsHomePage

Yes Scotty,

I have a whisker pole for the 150 and use it often.. The whisker poles
allows me to get the Assy upwind and the 150 drawing near By the Lee.
Fast downwind sailing


http://community.webtv.net/tassail/ThomsHomePage

Scotty,

Just put a picture of the Tacker show where it start life. (last
picture)

Ole Thom


http://community.webtv.net/tassail/ThomsHomePage

A tacker? Bwaaaaaaaaahhhhahhahahhahahhahahah!

You should call it a tackier because it's tackier than anything
I've ever seen.

It just proves my contention that roll-ups are more trouble than they're
worth. I can't believe anybody would make a Mickey Mouse system
even more Tinker Bell. But, then again, with a pilot house vessel how
can one get much tackier than that?

Buy a couple real, hank-on headsails - lose the garbage.

CN


"Thom Stewart" wrote in message ...
Scotty,

Just put a picture of the Tacker show where it start life. (last
picture)

Ole Thom


http://community.webtv.net/tassail/ThomsHomePage