LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Joe
 
Posts: n/a
Default

Geeze Rick, For someone playing tugboat capt instead of being one you
have lots of room to talk right.

TPI = 1/35 (A x1/12) =A/420 where A is the
waterplane area for a particular draft in square feet.

The ship was approx 250 foot est 300-500 tons empty.
A cord of Oak weighs 2 tons.

Thats 260 tons cargo shipped aboard.

Like I said a flik flub but no the less a good story.

Jeff your the wannabe..... know it all..... smart lipped..tugboat
trash.


Joe
USMM Master # 607529

  #2   Report Post  
Bob Crantz
 
Posts: n/a
Default

Can you also calculate the metacentric radius?

Amen

BC

"Joe" wrote in message
ups.com...
Geeze Rick, For someone playing tugboat capt instead of being one you
have lots of room to talk right.

TPI = 1/35 (A x1/12) =A/420 where A is the
waterplane area for a particular draft in square feet.

The ship was approx 250 foot est 300-500 tons empty.
A cord of Oak weighs 2 tons.

Thats 260 tons cargo shipped aboard.

Like I said a flik flub but no the less a good story.

Jeff your the wannabe..... know it all..... smart lipped..tugboat
trash.


Joe
USMM Master # 607529



  #3   Report Post  
Joe
 
Posts: n/a
Default

Can Jesus walk on water?

Joe

  #4   Report Post  
Bob Crantz
 
Posts: n/a
Default

Amen!

BC

"Joe" wrote in message
ups.com...
Can Jesus walk on water?

Joe



  #5   Report Post  
Jetcap
 
Posts: n/a
Default

Joe wrote:
Geeze Rick, For someone playing tugboat capt instead of being one you
have lots of room to talk right.


Bwahahahahah ... After 7 years of owning and operating my own tug I sold
it last month and now run a 35m 6000 hp yacht (jetboat) in Florida.
Tugboat trash no more G

TPI = 1/35 (A x1/12) =A/420 where A is the
waterplane area for a particular draft in square feet.


Ain't Google great?

Jeff your the wannabe..... know it all..... smart lipped..tugboat


I've known and sailed with quite a few Master Mariners, and Joe, you
will never have the horsepower, the skills, or the attitude to hold that
honorarium ... it is one that is earned. Come back when you have a real
license and a cv to back it up. In the meantime try and show some
respect to real master mariners, like Otn, who seem to make you so
jealous.

Rick
USCG Master
USCG Chief Engineer Steam/Motor/Gas Turbine


  #6   Report Post  
Bob Crantz
 
Posts: n/a
Default

Are you a chauffeur for some rich guy?

BC

"Jetcap" wrote in message
...
Joe wrote:
Geeze Rick, For someone playing tugboat capt instead of being one you
have lots of room to talk right.


Bwahahahahah ... After 7 years of owning and operating my own tug I sold
it last month and now run a 35m 6000 hp yacht (jetboat) in Florida.
Tugboat trash no more G

TPI = 1/35 (A x1/12) =A/420 where A is the
waterplane area for a particular draft in square feet.


Ain't Google great?

Jeff your the wannabe..... know it all..... smart lipped..tugboat


I've known and sailed with quite a few Master Mariners, and Joe, you
will never have the horsepower, the skills, or the attitude to hold that
honorarium ... it is one that is earned. Come back when you have a real
license and a cv to back it up. In the meantime try and show some
respect to real master mariners, like Otn, who seem to make you so
jealous.

Rick
USCG Master
USCG Chief Engineer Steam/Motor/Gas Turbine



  #7   Report Post  
Jetcap
 
Posts: n/a
Default

Bob Crantz wrote:
Are you a chauffeur for some rich guy?


Yes, indeed.

Rick
  #8   Report Post  
Joe
 
Posts: n/a
Default

First off Rick I have mucho respect for otm, who said I did not?

2nd your ol wore out tug run up and down the marina towing nothing.

3rd nothing worse than being a gofer for some rich snob, thats gotta be
the worst job on the sea.
4th Ive ran tugs over 10,000 hp.

Whats you ticket number?

Joe

  #9   Report Post  
Jetcap
 
Posts: n/a
Default

Joe wrote:
First off Rick I have mucho respect for otm, who said I did not?

Your attitude toward real mariners.

2nd your ol wore out tug run up and down the marina towing nothing.

Yup, it was a magnificent yacht conversion. It has been many years since
my licenses were so small the only work I could find was on tugs.

3rd nothing worse than being a gofer for some rich snob, thats gotta be
the worst job on the sea.

One you will never be qualified or fit to perform ... bwahahahahaha

4th Ive ran tugs over 10,000 hp.

Aground probably, if they ever let you touch the wheel.

Whats you ticket number?

What's it to you?

Rick
  #10   Report Post  
Joe
 
Posts: n/a
Default



WTF? What attitude towards real mariners are you talking about? Guess
your another self titled Master Mariner right?

And yeah I've ran aground a few time, when you have over a millions
miles under various keel running every port and river on the Gulf Coast
you will run aground many times. You telling me you have never run
aground chief?

I just have a friend up at the USCG office in Houston who can tell me
if your full of **** or not as to holding a Master ticket.

If you have one then more power to you, congrats, ect..

And BTW I got the hell out of the Marine transport business because I
found a way to make in a month what I was paid a year running supply
vessels. I may get back into it some day but as an owner not an
operator.

Joe



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Please don't chase me away (Apprentice person) Zyana ~ Beu Ribe Boat Building 11 December 9th 03 04:01 PM


All times are GMT +1. The time now is 08:27 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017