Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
DSK wrote:
Thom Stewart wrote: Doug, Sorry my answer wasn't complete. My Harken Furler is a Mark III, model 0 and it is replacing the same. I love it. When I was talking to Herb Hild about a head sail for my old furler, he said " Anything that will keep me, my family, and my friends off the Pointy End of the boat, while under way is a good thing." That is my Motto also. Agreed. And Harken stuff is very good. One minor objection I have... and this is on OPB's... people with roller furled sails who refuse to take any action to secure them for storms. So far, this season we've had some brushes with hurricanes but no bad hits, and there are still a half-dozen lazy and/or dumb owners in our marina who refuse to take off & stow their roller-furled genoas. Lucky so far, but our boat is between two of them. Fresh Breezes- Doug King My genoa, made by Hood, came with a cover made of sunbrella. Longest zipper I've ever seen, you attach a loop from the cover to the spin halyard, close the cover around the bottom of the genny, close the zipper, holding onto the zip tab, haul away on the halyard and up goes the cover zipping closed as it goes. There's a tab at the bottom of the thing that covers the end of the zipper and snaps closed when it's all done up. I imagine it'd hold in a pretty good blow. However if I thought I was going to be facing hurricane force winds I would remove all my canvas and stow it below. Cheers Marty |
#12
![]() |
|||
|
|||
![]()
Martin Baxter wrote:
My genoa, made by Hood, came with a cover made of sunbrella. Longest zipper I've ever seen, you attach a loop from the cover to the spin halyard, close the cover around the bottom of the genny, close the zipper, holding onto the zip tab, haul away on the halyard and up goes the cover zipping closed as it goes. There's a tab at the bottom of the thing that covers the end of the zipper and snaps closed when it's all done up. I imagine it'd hold in a pretty good blow. Yes that should be a good way of securing the sail, also keel the leech from UV damage. Much better (although slightly more work) than sewing a strip of heavy canvas along the leach. However if I thought I was going to be facing hurricane force winds I would remove all my canvas and stow it below. Right, but then, you have good sense. One of boats next door to ours in the marina is a nice Allied ketch, owned by a tall slim elderly man. I offered the help him get his canvas down for one of the earlier hurricanes, and then gently & tactfully insisted that I help him get his canvas down... the result is that his wife thinks I'm a *heck* of a nice guy ![]() Fresh Breezes- Doug King |
#13
![]() |
|||
|
|||
![]()
Doug,
Please make sure you tell that slim old gentleman, that this fat old gentleman says, to tell him you are ready and able to get those sails back on and set or him. Ole Thom |
#14
![]() |
|||
|
|||
![]()
"Martin Baxter" wrote
My genoa, made by Hood, came with a cover made of sunbrella. Longest zipper I've ever seen, you attach a loop from the cover to the spin halyard, close the cover around the bottom of the genny, close the zipper, holding onto the zip tab, haul away on the halyard and up goes the cover zipping closed as it goes. There's a tab at the bottom of the thing that covers the end of the zipper and snaps closed when it's all done up. I imagine it'd hold in a pretty good blow. However if I thought I was going to be facing hurricane force winds I would remove all my canvas and stow it below. That's what I did for hurricane Isabel, last year, but normally just wind the sheets around 3 times and tie a seperate short line around the furled sail. Scotty |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Evinrude Head Gasket Salt Deposits | General | |||
replace head on a mercruiser 350 engine | General | |||
OT--Not again! More Chinese money buying our politicians. | General | |||
Grocco Head Replacement | Cruising | |||
Head Gasket on 50 HP 93 Evinrude | General |