Incredible learning experience
 

On 04 Jun 2004 11:59:39 GMT, (JAXAshby) wrote:

This is because the Atomic 4
. . . with its compression
ration

Why did they ration the compression in the Atomic 4? Is compression
becoming a rare natural resource and needs to be doled out like
gasoline and rubber during the '40's?

Incredible learning experience
 

JAXAshby wrote:

btw, slots -- as the term slots is used correctly -- are seldom used on jets
(some fighter jets have them). what most people think are "slots" are moveable
portions of the wings that are slide forward and down to increase wing area for
lower landing speed.

Back in form I see, Jax. Posting ignorant statements about things you
know nothing of ... you are consistent anyway.

Leading and trailing edge devices on aircraft wings are not intended to
increase wing area. Leading edge devices, slats or slots, help to keep
the airflow attached to the wing boundary flow at high angles of attack.
Trailing edge devices, flaps, changes the angle at which airflow
leaves the wing, increasing lift.

Find a new subject, Jax, this is one more example of the thousands of
subjects in which you are totally lost.

Rick

Incredible learning experience
 

a rare natural resource and needs to be doled out like
gasoline and rubber during the '40's?

actually, gasoline was rationed in WWII to conserve rubber.

Incredible learning experience
 

ricky, for the kriste sakes. never, ever, under any circumstances ever again
open your stupid, ignorant totally ill-informed mouth on anything aeronautical
at all.

btw, slots -- as the term slots is used correctly -- are seldom used on
jets
(some fighter jets have them). what most people think are "slots" are
moveable
portions of the wings that are slide forward and down to increase wing area
for
lower landing speed.

Back in form I see, Jax. Posting ignorant statements about things you
know nothing of ... you are consistent anyway.

Leading and trailing edge devices on aircraft wings are not intended to
increase wing area. Leading edge devices, slats or slots, help to keep
the airflow attached to the wing boundary flow at high angles of attack.
Trailing edge devices, flaps, changes the angle at which airflow
leaves the wing, increasing lift.

Find a new subject, Jax, this is one more example of the thousands of
subjects in which you are totally lost.

Rick

Incredible learning experience
 

On 05 Jun 2004 01:31:38 GMT, something compelled
(JAXAshby), to say:

a rare natural resource and needs to be doled out like
gasoline and rubber during the '40's?

actually, gasoline was rationed in WWII to conserve rubber.

Apparently your grasp of history is every bit as authoritative as
your grasp of aerodynamics.

Incredible learning experience
 

Gasoline was ration to conserve rubber

Very true Jax, you got it right!! Now tell us why it was lifted?

While you're at it, tell us old sailors how to the trim our sail to
maximize driving force according to "Newton's Laws of Motion"

Can we still use tel-tail as we did with Bernoulli's Theorem?

Tell us all, now that you admitted to increasing the curved surface (
making chord larger) to increasing lift at slower, speeds why this is
so? What happens?
Most of us; "Older Sailor" accept Newton's Law. We Hope you can
enlighten us to the whys

Ole Thom :^)

Incredible learning experience
 

well, I just accepted the statements by the people who made the decision.

(JAXAshby), to say:

a rare natural resource and needs to be doled out like
gasoline and rubber during the '40's?

actually, gasoline was rationed in WWII to conserve rubber.

Apparently your grasp of history is every bit as authoritative as
your grasp of aerodynamics.

Incredible learning experience
 

old fart, "chord" as the term is used in aeronautics, means a straight line.

increasing the curved surface (
making chord larger

Incredible learning experience
 

Rick;

The Jax isn't totally lost, he just goes off on a tangent without enough
knowledge. Where ever he thinks he has found an exception to the
excepted norm is his favorite topic!

He is rather like a Tenor, in the Choir, singing off key. Hard on the
nerves but harmless.

Ole Thom

Incredible learning experience
 

No Jax;

There are many, many straight line in aviation that are called just
that, and you know it.

You also know that "Chord" is used as a measurement in Airfoil
dimensions. Also used in Sail Trim.

However, that does't answer the question about Sail Trim for Newton's
Law, does it? That is the question that has been posed to you. How do us
"OLD SAILORS" know how to get the most out of sail trim adjusting for
Newton's Law. What do we look for as we adjust;
Halyard tension

Outhaul

Cunningham

Sheet tension

Vang tension

Slot position MAIN/JIB

We know these things affect the speed of the boat. How can we know how
to get the Max Effect? What do we look for?
We know those "Dumd Ass sialing to those Bernoulli postioned tel-tails
are going faster. Help us converts to Newtons Law.

Ole Thom