best way to patch a thru hull?
 

If the through hull is 1.5 inches and the hull 0.5 inches thick Neal's
recommendation would give just a such a taper. I think you miss the
point though. In plugging a through hull the repair is not generally
intended to be structural -just a bond secure enough to stop the plug
falling out is all that is required. Finer tapers are of course needed
for full structural repairs where the stress on the laminate must be
transferred acorss the repair.

Cheers MC

DSK wrote:




The hole should be tapered in a radius of approximately
four times the radius of the hole itself.


Malarkey again.

The taper should be between 4:1 to 12:1 by thickness, the diameter of the
hole has nothing to do with it.

best way to patch a thru hull?
 

"Jonathan Ganz" wrote in message ...


Obviously, another intellectual here.


Obviously, You asked.


Is there another method that's as or more effective?


And I told you the answer. Steel when welded to steel will be stronger
and outlast any plastic or fiberglass patch. It's a fact.

A smarter person, an intellectual might have asked a more specific
question.


Joe
MSV RedCloud


Jonathan

best way to patch a thru hull?
 

I have heard that the plastic styrofoam will not decompose for 10,000
years. Perhaps if you had been more specific in your value judgment it
might have had more validity. If what you were saying was true,
surveyors would not check hull thickness on old steel boats would they?

Cheers MC

Joe Butcher wrote:



And I told you the answer. Steel when welded to steel will be stronger
and outlast any plastic or fiberglass patch. It's a fact.

A smarter person, an intellectual might have asked a more specific
question.


Joe
MSV RedCloud


Jonathan

best way to patch a thru hull? - Winner.jpg (1/1)
 

On Mon, 15 Sep 2003 20:03:11 -0300, "Capt. Mooron"
wrote this crap:

Who are the Losers holding that flag???

You're looking at most of the Horvath Racing Syndicate.
In case you don't know, the blue flags are first place.





Ave Imperator Bush!
Bush Was Right! Four More Years!

best way to patch a thru hull? - Winner.jpg (1/1)
 

Darn it all.... all I ever get is a Trophy!

What's Up with That!!??

CM

"Horvath" wrote in message
...
| On Mon, 15 Sep 2003 20:03:11 -0300, "Capt. Mooron"
| wrote this crap:
|
| Who are the Losers holding that flag???
|
| You're looking at most of the Horvath Racing Syndicate.
| In case you don't know, the blue flags are first place.
|
|
|
|
|
| Ave Imperator Bush!
| Bush Was Right! Four More Years!

best way to patch a thru hull? - Winner.jpg (1/1)
 

In the idiot line?

Cheers MC

Horvath wrote:

In case you don't know, the blue flags are first place.

best way to patch a thru hull?
 

A smarter person would know that fiberglass isn't steel.

"Joe Butcher" wrote in message
om...
"Jonathan Ganz" wrote in message
...


Obviously, another intellectual here.


Obviously, You asked.


Is there another method that's as or more effective?


And I told you the answer. Steel when welded to steel will be stronger
and outlast any plastic or fiberglass patch. It's a fact.

A smarter person, an intellectual might have asked a more specific
question.


Joe
MSV RedCloud


Jonathan

best way to patch a thru hull? - Winner.jpg (1/1)
 

On Mon, 15 Sep 2003 22:21:28 -0300, "Capt. Mooron"
wrote this crap:

Darn it all.... all I ever get is a Trophy!

What's Up with That!!??

You have to win a race to get a flag. The junk you get from those
truck stop 50 cent cranes don't really count as trophys.




Ave Imperator Bush!
Bush Was Right! Four More Years!

best way to patch a thru hull?
 

On Mon, 15 Sep 2003 21:13:13 -0700, "Jonathan Ganz"
wrote this crap:

A smarter person would know that fiberglass isn't steel.

Then you wouldn't know, Jon-boy.




Ave Imperator Bush!
Bush Was Right! Four More Years!

best way to patch a thru hull? - Winner.jpg (1/1)
 

Horass,

Is that where you pick up your boyfriends... in truck stops?
You must have a lot of experience with that. I wouldn't
call them trophies, but I guess you do.

"Horvath" wrote in message
...
On Mon, 15 Sep 2003 22:21:28 -0300, "Capt. Mooron"
wrote this crap:

Darn it all.... all I ever get is a Trophy!

What's Up with That!!??

You have to win a race to get a flag. The junk you get from those
truck stop 50 cent cranes don't really count as trophys.




Ave Imperator Bush!
Bush Was Right! Four More Years!