That happened to me after 12 years - it takes a set - try moving the
bellows position to make it tighter - I used a big hose clamp on the
bellows for a year to apply pressure till I changed it next year - the
bellows was about $65 or so. I replaced the shaft and both bearings at
the same time - so it's good for another 12+ years.


On 24 May 2004 16:46:30 GMT, pamsuks (JayCeeCG)
wrote:

I think that your bellows might be due for replacement. PSS changed that part
as the old style bellows would take a "set" and not press the seal together as
they should.

Question has anyone using the PSS system had the problem?

PS these things have worked perfectly on our for 9 years



Jared Crane