Anyone have any (hopefully useful) advice on how to maintain and/or
lubricate
(if needed) Marelon seacocks? Do they require lubrication like bronze
seacocks? BRBR

Just received this from "Forespar:"



Resources - Tech Tips

Marelon® - Marine Grade Plumbing Systems
Valve Lubrication:
As a follow up to previous Tech Tips; it is important to know that while
Marelon®Â* fixings are corrosion resistant, they do require twice yearly
lubrication maintenance. These valves should be activated on a regular
schedule. The handle should be moved throughout the open/close path every
thirty days. Leaving a valve open or closed without moving the handle can cause
freeze-up. This is true of any valve, including bronze. The law of nature is
"use it or loose it".

To lubricate ball valves and seacocks while the boat is in the water you must:
1. Close valve.
2. Remove hose from tailpipe.
3. Remove remaining water from valve/tailpipe.
4. Swab waterproof grease (water pump grease, winch grease) or
LanoCoteâ„¢, generously, on ball.
5. Reattach hose, checking for fatigue and rusted hose clamps.
6. Activate valve a few times. When boat is hauled, you can perform steps
4-6 from outside the hull to lubricate opposite side of ball and seals.