I watched a video on boat repair recently in which polyester and gelcoat
were used to repair a crack in a polyester boat below the waterline. The
inside of the hull was sanded down and 2 layers of mat applied. Then
the finish on the outside was sanded, then some putty filler followed by
gelcoat were put on with lots of sanding with different grits at each stage.

--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned