Alpha 1 gen 2 speedo question
The pitot opening is on the leading edge of the outdrive.
You should be able to make the speedometer indicate more than 10 MPH when
you blow through the hose; keep the hose off the pick up end, remove the
hose at the speedometer and try blowing the tube clear.
"Steve Lomax" wrote in message
...
Good Idea, Thanks
Steve
"MIDEMETZ" wrote in message
...
Consider not conecting the hose where ever you disconected it to blow
throu it,
untill you run it first and let it flush out any bits and pieces left.
Mike
|