"Tony Thomas" wrote in message
news:hM5xc.55563$3x.1392@attbi_s54...
Then prop is probably not the issue since you have a good one.
Either the engine is mounted slightly too high for hard turns or your trim
angle is wrong. You should trim down to make the turn. Thing about
lowering the engine mount is you will loose top end.
Which hole is the motor mounted w/. Remember - top hole means motor all
the
way down and bottom hole means motor all the way up.

Just went out and double checked the engine is mounted in the top holes. So
I will try trimming during the turns.
Thanks