View Single Post
  #18   Report Post  
posted to rec.boats.electronics
Glenn Ashmore Glenn Ashmore is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 329
Default Can an alternator be to big?

The surveyor that my insurance company hired to monitor my progress has seen
the Leese Neville which is not "USCG approved" and accepted it with out
reservation.

Actually neither 46 CFR 176 or 46 CFR 183 require approval of alternators in
diesel powered environments. The only source I can find that recommends
using only marine approved alternators is our friend David Pasco and he even
has the reference to the requirements wrong. J1527 is specific to hose
standards, not alternators.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"Capt John" wrote in message
ups.com...

chuck wrote:
Larry wrote:
"Capt John" wrote in news:1153072859.862252.17460
@p79g2000cwp.googlegroups.com:

Also, if it's not CG approved, and you have a fire because of it,
your insurance company is going to walk away, it's your problem. I'd
stick with the normal marine alternator if I was you.



I think THAT is a very important point, too....


Doesn't the CG requirement kick in only
for gasoline engines? I doubt the
insurance company could walk if the
engine is diesel.

Chuck


The CG requirement is for diesel as well, diesel fuel burns quite well.
Cracked high pressure diesel fuel lines can produce a very fine fuel
mist, and it makes for one hell of a fire if it hits a spark or a hot
dry turbo. Give an insurance company an excuse to walk away from paying
on a loss and watch how fast they run. That's what they pay their
people to do. I looked quickly at my Cat alternator part numbers, they
look like differant part numbers than the truck numbers in the catalog.
It just isn't worth it.