I decided on a remanufactured cummins 6BTA5.9 "250hp" Velvet drive 72 series
1:1 and a Konrad 520 outdrive. What do you think of those engines. The
dealer is setting it up with a water pump from a 315, glow plugs and an
inline injection pump.

"Calif Bill" wrote in message
nk.net...

"Bill Kiene" wrote in message
t...
I was up in Cordova, Alaska a few years ago and saw aluminum commercial
work boats that were powered by GM gasoline V8s with jet drives. I asked
why they used them in the ocean because they are not as fuel efficient as
a propeller drive. They said because they work nets right in close to the
shallows and they had less damage with a jet drives. Outboard jets have
about 30% lose of power while inboard jet drives have about 15%.

If you don't have a reason (running in shallow water) for a jet drive I
would stay away from them.

--
Bill Kiene

Kiene's Fly Shop
Sacramento, CA, USA

Web site: www.kiene.com


"mark" wrote in message
...
Does anyone here have any experience with a 250hp mercruiser/cummins
jet/sterndrive. Would it be a good candidate to repower a 31' X 12'
aluminum workboat. What are the pros/cons of a jetdrive vs a prop
sterndrive.




The newer Hamiltons only lose about 5%. As to the diesel question, go the
the forums at www.riverjetmagazine.com Maxrat is a builder and has done a
couple of the first diesel jets in riverboats. Is working with Yanmar and
Cummins.