"K. Smith" wrote in message
...


Here is the proof positive the dealer who posted this deceptive BS will
say &/or do most anything to make a sale

At 5400 (305rpm below their dealer claims) just what HP would a 250 E-Tec
be actually making??? a simple bit of math would indicate as low as
213-220HP!!! nothing even like 250HP (per engine 18.93 gph /0.0888gph per
HP = 213HP)




OK, Ms. Smith,

Once again you are showing off your ignorance of E-TEC motors and (with your
own quote) "Here is the proof positive". The Evinrude E-TEC is rated at
250hp at 5150 rpm so at 5400 rpm it is within its operating range and well
below the redline of 5800 rpm.

Since you are the one demanding "proof" on everything, yet NEVER give any
for your "claims", just click on Evinrude's website and read the
specifications page. I'll even hold your hand and give you the link:
http://www.evinrude.com/en-US/Engine...ations/250.V6/

The above link is for the US website, for Australia, you can click on the
BRP International website in English and once again, you will see that you
were wrong about the E-TEC specs:
http://www.brp.com/en/Products/Evinr...ductID=ETEC250

I don't mind discussions and debates, but I prefer to converse with someone
who is at least familiar with a subject and who doesn't run off at the mouth
making erroneous and unsubstantiated claims.

Bill Grannis
service manager

..