View Single Post
  #7   Report Post  
Jeff Rigby
 
Posts: n/a
Default Oil use question


"JamesgangNC" wrote in message
ink.net...
That's not enough to do anything about. Mine burns a little. Some folks
say they never notice any oil loss between changes. I presume you are
sure there are no leaks? The older chevy v8's occasionally leaked around
the valve covers and the rear oil seal. Both of those spots had design
changes in I believe 1987.


I've got a 91 5.7 and I don't use any oil but I did have a leak that
occured when the engine overheated, it leaked out the intake manafold
gasket. Removing mamfold and using rtv fixed that problem.


For oil to burn it either is getting past the rings or down the valve
guides. Both are a whole lot of work to replace so no one does until the
oil consumption gets really bad or there are other sypmtoms.

"Big Pop" wrote in message
oups.com...
Hi all, I'm new here so take it easy on me while I get my sea legs :-)

I have a question concerning the amount of oil my boat is using. From
day 1 it has used approximately 1/2 quart every 30 hours. The engine is
a 350 Chevy engine and I never bring the rpm's up over 3800. The
dealer, and several mechanics have told me this is perfectly normal,
and that all engines burn some oil.

Does this amount of oil consumption seem normal?

Thanks,

Big Pop.