Moores family wrote:

G'day
The existing VHF cable run was up the starboard main shroud in UR67 and
it looked 'orrible, especially when half the tape was falling off. One
of my options is to do the same on the mizzen, but I'll use smaller
diameter coax- VHF performance isn't a problem. I guess if I run VHF up
one side and riding light up the other it would at least be symmetrical.
Thanks
JM
----------------^
|
| Jonathan Wye wrote:
|
| If you have a clear run (i.e., you actually can run a snake from step
| to tip of mast) can you come up directly under the center of the mast
| and run up to the top?
^
| I realize I am assuming deck stepped which is probably not accurate....
|
| I acquired a 30 ft wooden sloop years ago that had the VHF antenna
| wire taped to the backstay and entering the boat at the stern, running
| up to the radio. No one ever commented on it, and it worked.
| Periodically I would renew the black tape. It was better IMHO than
^ having a bunch of little screw or nail holes holding conduit going up
| the mast and disturbing the continuity of the varnish layer.
|
| good luck,
|
| Jonathan
|
^
|_________________________________________________ __
Bugger- I don't know how that ended up up there...^