View Single Post
  #22   Report Post  
JAXAshby
 
Posts: n/a
Default

dood, that is utter bull****. that lab you retired from was a back woods drug
lab.

do a google (if you are capable) on the chemical makeup of octane and see how
many oxygen atoms you find.

From: Matt Colie
Date: 9/23/2004 6:25 PM Eastern Daylight Time
Message-id:

Matt,

Believe it.

Of that stuff you call gasoline (those things that come of the the
distillation between 100 and 200 degF) there is no chemical formulae.

It is all organic hydrocarbon and the best they can due is provide a
hydrogen/cardon ratio. And that is Gasoline...

What gets added after that is anybody's bet. It isn't Tetraethyllead
Pb(C2H5)4 anymore, but it can be any portion of a chemical alphabet
soup (like MTBE, TAME and ETBE) with out even getting to the oxygenates.

Most what was added in teh pst improved the octane rating. now what is
added is largely to improve the combustion efficiency.

Matt Colie (Engine Lab Rat -ret)


Matt Lang wrote:
I find it highly unlikely that there are no Oxygen (O) atoms in gas....

Matt

"Ken" wrote in message

...

One thing with ethanol is that the stuff contains oxygen atoms along with
the hydrogen and carbon atoms, where as straight gasoline is hydrogen and
carbon only. The oxygen tends to lean the mixture entering the engine. No
matter what carb setting you apply after that, the air/fuel ratio never

gets
back to what it was. A lean mixture will burn hotter and more readily
creates detonation and preignition (4 cylinders inboards tend to have
dieseling problems with the stuff). It can also cause stalling problems.
With cars the oxygenated fuels tends to work ok as the computers and

sensors
keep a good control. With marine engines its a problem.


"Larry Weiss" wrote in message
...

Both of my power boats have developed severe engine hesitation
problems. They run okay at idle but sputter and stall when revved. My
mechanics have complained that they are seeing this problem left and
right - and are blaming it on the gasoline, which around here (Long
Island, NY) now contains 10% ethanol. I know ethanol is not good for
rubberized fuel lines, but did not know it caused running problems
(unless the fuel lines are deteriorating and clogging). The gas in each
boat was purchased at a different fuel dock.

If my mechanics are correct, this is a serious regional (national?)
problem. Anyone else experiencing difficulty? Any comments or
suggestions? How can we get gasoline without ethanol in it? How is the
marine industry addressing this?

Larry Weiss
"...Ever After!"
"a little after..."