"Jim Thompson" wrote in message
...
We want to build a small L-shaped bench for the flybridge on a 30'
powerboat. It will be self-contained (not built into the flybridge).
We want to keep the weight down, and it must be water resistant. What
is the best material? I wondered about 1/4' plywood braced with a
frame of 1x1" wood and covered with epoxy/cloth?
Jim
unless you use the 1"x1" to also stiffen the plywood, 1/4" will feel a bit
bouncy/flimsy. I'd suggest 3/8".
Otherwise it's hard to beat plywood for what you are proposing. Just make
sure you coat the plywood well with at least 2 coats of epoxy, especially at
exposed end grain.
--
Evan Gatehouse
you'll have to rewrite my email address to get to me
ceilydh AT 3web dot net
(fools the spammers)
|