I would not keep it completely full of melt and by making it relatively
narrow fore and aft the level can still be fairly high without spilling.
auerbach wrote:
Glenn,
You say "It will need foot rests to keep braced in the seats on a heel."
Won't melt-water in your cooler spill out on when your boat heels?
Alex
--
Glenn Ashmore
I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at:
http://www.rutuonline.com
Shameless Commercial Division:
http://www.spade-anchor-us.com